Assembly - Disassembly; Disposal - Wilo Extract FIRST Series Installation And Operating Instructions Manual

CAUTION! Possible damage of the pump
A common cause of faults is a silted-up or choked pump. The pump
without stand must hang sufficiently high above the bottom of the shaft
that it is not possible for it to silt up.
ON repeated trippings of the overload protector it will be necessary to
have the pump checked by a specialist or by WILO customer services.
If no solution can be found, please contact your plumbing and heating spe-
cialist or your nearest Wilo Customer Service or representative.
9 Assembly – Disassembly
CAUTION! Be careful not to mix parts.
Unplug the pump (see FIG. 9a and 9b)

10 Disposal

Your device contains valuable raw materials which can be recycled. Therefore,
please take your device to your local collection point in your town or district.
Subject to technical alterations!
Installation and operating instructions Wilo-Extract FIRST ...
English
17