At-930 Installation - Kenwood TS-930S Instruction Manual

oO
YG-455C-1
YG-455CN-1
6.4 AT-930 INSTALLATION
(1) Remove the top and bottom covers (16 screws, total)
from the transceiver.
(2) Remove the 4 screws and cable retainers located in
the AT-930 mounting space.
(3) Using a long-nosed plier, carefully disconnect the
coaxial cable from the filter unit ANT terminal
CAUTION: ——_-
Coax leads with connectors are not repairable. When connecting
or disconnecting, do not break the male or female connectors.
(4) Secure the AT-930 to the transceiver using 4 screws.
CAUTION:
Do not pinch any leads between the AT-930 and transceiver
chassis.
(5) Install the multi-connector to the AT-930.
(6) Connect the coaxial cable, which was removed from
the filter unit, to the AT-930 MAT terminal.
(7) Connect the supplied coaxial cable between the
AT-930 ANT terminal and the filter unit ANT terminal.
(8) Replace the transceiver top and bottom covers. The
AT-930 is now ready for automatic operation.
Filter unit
AT-930
HOTA
CNA
Filter unit
~% fougdes
31