Table of Contents
Advertisement
Game console or camcorder
The most practical connection for a mobile
game console or camcorder may be at the side
of the TV. You can, for example, connect the
game console or camcorder to VIDEO/S-Video
and AUDIO L/R connectors at the side of the
TV. A HDMI connector is also available for high-
defi nition devices.
A permanent game console or camcorder can
be connected to a HDMI connector or EXT 3
(component) connectors at the back of the TV.
Personal computer
Before connecting the PC:
•
Set the PC monitor refresh rate to 60Hz.
•
Change the TV picture format to
[Unscaled] .
To connect a PC to the back of the TV
1
Using a HDMI to DVI cable or a HDMI-to-
DVI adaptor (attached to a HDMI cable),
connect a HDMI connector on the back of
your TV to the DVI connector on your PC.
2
Connect an audio cable from your PC to
the AUDIO IN mini-jack connector at the
back of the TV.
44
EN
Note
•
You must assign the AUDIO IN mini-jack connector to
the HDMI connector (see 'Adding the AUDIO-IN mini-
jack connector' on page 45 ) .
Setup devices
When all devices are connected, you must
select the type of device attached to each
connector.
Assign devices to connectors
For easy selection and best signal handling,
assign the device connected to the connectors
on your TV.
1
Press MENU on the remote control
and select [TV menu] > [Installation] >
[Connections] .
Advertisement
Table of Contents
