Setup Devices - Philips 37PFL5603D/10 User Manual

A permanent game console or camcorder can
be connected to a HDMI connector or EXT 3
(component) connectors at the back of the TV.
7�3�9 Personal Computer
Before connecting the PC:
• Set the PC monitor refresh rate to 60Hz.
See Section 8 Technical specifications for a list
of computer resolutions.
• C hange the TV picture format to Unscaled
as described in Section 5.3.4. Change picture
format.
To connect a PC to the back of the TV
1. Using a HDMI to DVI cable or a HDMI-to-
DVI adaptor (attached to a HDMI cable),
connect a HDMI connector on the back of
your TV to the DVI connector on your PC.
2. Connect an audio cable from your PC to
the AUDIO IN mini-jack connector at the
back of the TV.
Note
D
You must assign the AUDIO IN mini-jack
connector to the HDMI connector as
described in Section 7.4.3 Assign the AUDIO
IN mini-jack connector.
EN-44
7�4

Setup devices

When all devices are connected, you must
select the type of device attached to each
connector.
7�4�1 Assign devices to connectors
For easy selection and best signal handling,
assign the device connected to the connectors
on your TV.
1. Press MENU on the remote control
and select TV menu > Installation >
Connections.
Connections
EXT 1
EXT 2
EXT 3
HDMI 1
HDMI 2
HDMI 3
Side
...
2. Press Æ to enter the list.
3. Press ï or Î to select a connector.
4. Press Æ to enter the list.
5. Press ï or Î to select the device attached
to the connector.
6. Press OK to select the device.
7. Repeat the procedure until all devices are
correctly assigned to connectors.
8. Press MENU to exit.
7�4�2 Assign the AUDIO IN mini-jack
connector
If you connect audio from a PC to the AUDIO
IN mini-jack connector at the back of the TV,
you must associate it to the HDMI connector.
1. Press MENU on the remote control
and select TV menu > Installation >
EXT 1
None
DVD
Blu-ray
HDD/DVDR
HD rec.
Game
VCR
...