Setup Devices - Philips 42PFL5203 User Manual

A permanent game console or camcorder can
be connected to an HDMI connector or AV
IN (component) connectors at the back of the
TV.
7.3.7. Personal Computer
C Caution
Before connecting the PC, set the PC
monitor refresh rate to 60Hz. See Section
11 Technical data for a list of computer
resolutions.
Connecting to the back of the TV (VGA)
1. Connect your PC to the VGA connector at
the back of the TV.
2. Connect an audio cable from your PC to
AUDIO IN L/R connectors on the back of
the TV.
HDMI 1 HDMI 2 HDMI 3 AUDIO IN
AUDIO IN VGA
SERV. C
R L
R L
Y
Pb
VIDEO VIDEO
75X Pr
TV ANTENNA
L L L
R R R
CVI AV OUT AV IN
Connecting to the side of the TV
(S-Video)
If your PC has no VGA connection, use the
S-VIDEO and AUDIO L/R input connectors at
the side of the TV. This type of connection is
best suited to applications such as Windows
Media Center.
7.4

Setup devices

When all devices are connected, you must
select the type of device attached to each
connector.
EN-34
VGA
7.4.1. Select connectors
To select the device connected to the
connectors on your TV.
1. Press SOURCE on the remote control.
* Available in selected models
ï or Î to select a connector.
2. Press
3. Press OK to confirm.
4. Repeat the above steps to select another
connector.
Source list
TV
AV
SIDE AV
CVI
VGA
HDMI 1
HDMI 2
HDMI 3*
Side HDMI*