Select Connection Quality - Philips 32PFL7433D User Manual

Note
•
The number of HDMI connectors available may vary
according to your TV model.
h AUDIO IN
Mini-jack connector for PC audio in (when
connecting a PC via a DVI-HDMI adaptor).
Side connectors
i Headphones
Stereo mini-jack.
j AUDIO L/R
Audio L/R input connectors for composite
and S-Video devices.
k VIDEO
Video input cinch connector for composite
devices.
l S-VIDEO
S-Video input connector for S-Video
devices.
m USB
USB connector for storage devices.
n HDMI
Additional HDMI connector for mobile
high-defi nition devices.
o COMMON INTERFACE
Slot for Conditional Access Modules.

Select connection quality

This section describes how you can enhance
your audio visual experience by connecting
your devices with the best possible connectors.
After connecting your devices, be sure to
enable them (see 'Setup devices' on page 44 ) .
40 EN
HDMI - Highest quality
HDMI produces the best audio visual quality
possible. Both audio and video signals are
combined in one HDMI cable, providing an
uncompressed, digital interface between your
TV and HDMI devices. You must use HDMI to
experience full high-defi nition video. You must
also use HDMI cables to enable Philips EasyLink
(see 'Use Philips EasyLink' on page 45 ) .
Tip
•
If your PC only has a DVI connector, use a DVI-HDMI
adaptor to connect your device to a HDMI connector
at the back of the TV. You must connect a separate
audio cable from the device to the AUDIO IN mini-jack
connector.
Note
•
Philips HDMI supports HDCP (Highbandwidth Digital
Contents Protection). HDCP is a form of Digital Rights
Management that protects high defi nition content in
DVD or Blu-ray Discs.
Component (Y Pb Pr) - Higher quality
Component (Y Pb Pr) video provides better
picture quality than S-Video or composite
video connections. Though component video
supports high-defi nition signals, picture quality is
lower than HDMI and is analogue.
When connecting a component video
cable, match the cable colours to the EXT 3
connectors on the back of the TV. Also, connect
a Audio L/R cable to the red and white Audio
L/R input connectors at EXT 3.