Advertisement
A\ Caution:
Read this page carefully to keep your safety.
Before applying power
For the U.S.A. and Canada
Important!
Units shipped to the U.S.A. and Canada
are designed for
operation on 120 volts AC only.
Safety precaution for a Polarized AC plug
CAUTION:
To PREVENT ELECTRIC SHOCK DO NOT
USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
For the United Kingdom
Important!
Units shipped to the U.K. are designed for operation on 240
volts AC only.
The mains plug must be removed from the wall socket prior to
any internal examination.
The wires in this mains lead are coloured in accordance with
the following code:
Neutral
The wires
in this mains
lead must
be connected
to the
terminals in the plug as follows:
Wire colour
Plug terminal marking
N or Black
L or Red
Brown to
Live
Biue to
Neutral
wv )
Plug
Notes:
1. If a 13-amp plug is used, this must be fitted with a 5- amp
fuse.
2. If a 3-pin plug with earthing contact is used, no wire must
be connected to the E terminal.
Safety precautions
For Australia and Europe
Important!
Units shipped to Australia are designed for operation
on
240 V AC only.
Units shipped to Europe are designed for operation on 220 V
AC only.
For other countries
Important!
Units shipped to countries other than the above countries are
equipped
with an AC voltage selector switch on the rear
panel. Refer to the following paragraph for the proper setting
of this switch.
AC voltage selection
This unit operates on 110-120 or 220-240 volts AC. The AC
voltage selector switch on the rear panel is set to the voltage
that prevails in the area to which the unit is shipped. Before
connecting the power cord to your AC outlet, make sure that
the setting position of this switch matches your line voltage.
If not, it must be set to your voltage in accordance with the
following directions.
Note: ——2@___
Our warranty does not cover damage caused by excessive line
voltage due to improper setting of the AC voltage selector
switch.
AC110-120V\<4RAC220-240V\
AC110-120V°V-4RAC220-240VV
This shows switch
lever is locked in the
220-240V ~ position.
This shows switch
lever is locked in the
110-120V 'V position.
Move switch lever to match your line voltage
with a small screwdriver or other pointed tool.
AC voltage selector switch
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
HISK
OF
EERECTRIC
SHOCK
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE, REFER SER-
DO NOT OPEN
VICING TO QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD
SYMBOL, WITHIN AN EQUILATERAL TRIAN-
GLE, IS INTENDED
TO ALERT THE USER TO THE PRESENCE
OF UNINSULATED
*"DAN-
GEROUS VOLTAGE" WITHIN THE PRODUCT'S ENCLOSURE THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE 1S INTENDED TO ALERT
THE USER TO THE PRESENCE
OF IMPORTANT
OPERATING
AND
MAINTENANCE
(SER-
VICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING
THE APPLIANCE.
KT-2010/KT-2010L (En)
3
Advertisement
