Panasonic WX-C1011 Series Operating Instructions Manual page 3

PREFACE
The Panasonic Wireless Communication System operates
on UHF frequencies. It offers multichannel flexibility making
use of state of the art PLL (Phase Locked Loop) technolo-
ОУ.
The built-in diversity reception allows the use of two anten-
nas to ensure good performance.
A remote speaker can be added to the system. The Order
Taker transceiver is a one piece, light-weight design with
an easy-to-install battery.
New Functions of the WX-C1011
(New Technological Features)
* DNR (Digital Noise Reduction)
The DNR function embodies a new technology exclu-
sive to Panasonic, providing natural sound quality with-
out the disagreeable noise peculiar to digital process-
ing.
No Talkback Echo
Digital delay processing eliminates talkback echo from
the order taker.
TBC (Talkback Automatic Level Control)
Only human voice is identified in a mixed input of cus-
tomer voice and noise from the menuboard micro-
phone, then its volume is compared with that of the talk
of the order taker to automatically control the talkback
volume level.
PRECAUTIONS
The UHF wireless communication system is a sensitive,
high quality instrument and should be regarded as such.
Because it is an electrical device, the hazard of electric
shock exists, if it is used carelessly.
In order to utilize the instrument to its fullest potential,
please consider the following precautions;
1. Handle the equipment with care. This equipment con-
tains sensitive components which can be damaged by
improper handling or storage.
2. Refer any servicing to qualified service personnel. Do
not attempt to disassemble the Center Module, Order
Taker or other units. In order to prevent electrical
shock, do not remove screws or covers. There are no
user-serviceable parts inside.
3. Use a dry cloth to clean the Center Module, Order
Taker or other units if soiled or dirty. If necessary, a
mild detergent may be used.
4. Take immediate action if the Center Module or Order
Taker becomes wet. Turn the power off and have the
unit examined by a qualified service personnel. Do not
expose the Center Module or Order Taker to rain or
moisture, or attempt to operate the equipment in wei
areas. Do not operate the equipment if it is wet.
5. Follow normal safety precautions to avoid persona!
injury.
6. Properly store beltpack (WITH HEADSET PLUGGED
IN) in storage cabinet to prevent damage to equip-
ment.
7. Replace missing microphone and earpiece covers to
prevent distortion or loss of audio.
8. Repair or replace any defective components.
9. Turn off the Order Taker when not in use, in order to
save the battery life.
10. Charge battery when low battery indicator blinks and a
puising high/low beep tone is heard in headset.
11. Clean the Battery Charger in accordance with manu-
facturer instructions at least once a month.
12. Perform regular preventive maintenance by testing
accessories (headset, batteries etc.)