Boss BE-5B Owner's Manual page 4

@ OPERATION
m@ CONNECTION
Po vic {>
Amplifier Amplifier
OUTPUT A OUTPUT B
weut TUNER Out SEND RETURN A CUTPUT 8 PHONES wpe pert
© OUBOSS OO OO OF
OE. AY (MONO) DHRECT J
TUNER OUT SEND RETURN PHONES
Tuner (TU-12/TU-125 etc.: optional) INPUT OUTPUT
External Effect Device
AC Adaptor
(FV-5OL etc.: optional)
(PSA-120, 220 or 240: supplied)
Headphones (RH-12 etc. : optional)
Amplifier Amplifier
= OUTPUT = B
© aC TF
TUNER OUT
AC Adaptor
PHONES (PSA-120, 220 or 240: supplied)
Tuner (TU-12/TU-12S etc.: optional) |
{ apes _ = alereh-
Headphones (RH-12 etc.: optional)
©) power ©
Indicator lights.
1. Once the bass and amplifier have been connected as shown in the illustration,
connect the supplied AC adaptor. The unit is ready for use when Its Power
* Make sure volume is raised after connection is finished.
BASS MULTIPLE EFFECTS
|
SPLCIAL, SELECTED EFFECTS FOR Maemo
2. Each knob is set so it appears as shown in "PANEL DESCRIPTIONS".
3. Make the settings for each of the effects.
@ Use the Pedal Switch to turn "on" the effect that is to be set. (When on, the
Effects Indicators for that effect will light.)
* All other effects need to be "off."
1 a
@ While referring to "SAMPLE SETTINGS", under "PANEL DESCRIPTIONS",
make settings as desired.
@ Repeat the above procedures and make settings for the other effects.