Page 4
Panel Descriptions Panel Descriptions Name Function DC IN jack Use this jack to connect an AC adaptor (PSA series; sold separately). If you use the AC adaptor, you can play for a long time without worrying about running out of battery. * Use only the specified AC adaptor (PSA series;...
Page 5
Name Function An aggressive distorted sound with bite that recreates the distortion of the BOSS CE-1 preamp, using a newly-designed circuit. [BUFFER] (STD/VTG) switch This switches between input buffers with different characters when the effect is on. This changes the character of the high-end and the operability of the volume knob on your guitar.
Page 6
Changing the Batteries Changing the Batteries When operating on battery power only, the unit’s indicator will become dim when battery power gets too low. Replace the battery as soon as possible. * Batteries should always be installed or replaced before connecting any other devices. This way, you can prevent malfunction and damage.
Page 7
* This document explains the specifications of the product at the time that the document was issued. For the latest information, refer to the Roland website. Intellectual Property Right Roland, BOSS, 技, WAZA are either registered trademarks or trademarks of Roland Corporation in the United States and/or other countries.
Need help?
Do you have a question about the WAZA CRAFT BP-1W and is the answer not in the manual?
Questions and answers