Table of Contents
Advertisement
Installation Notes
The Sound Blaster/MCV can be used only on IBM* PS/2* model 50
and upwards which has the Micro Channel Bus.
2.1
Installing the Sound Blaster /MCV
1.
Make a backup copy of your PS/a* reference diskette, if you
have not done so.
Copy the @5084.ADF file which is on the Sound Blaster Disk
1
diskette into your PS/2* backup reference diskette.
Switch off the power supply of your computer and remove
its top cover.
Plug the Sound Blaster/MCV into any slot in your computer.
Put back your computer top cover now.
Insert your
PS/2*
backup
reference
diskette
into
the
A:
floppy drive.
Power on your computer and wait for it to detect the new
Sound Blaster/MCV.
Your computer will report error message
165, indicating a
new
adapter
card has been
installed
into your
computer,
select automatic setup to configure your computer to accept
the Sound
Blaster/MCV.
Instructions
is provided
on the
screen.
Follow them carefully.
NOTE : Whenever you remove, add or change an adapter card
in your PS/2* you have to reconfigure your computer.
P8/e is & registered trademark of International Business Machines Corp.
|®
Advertisement
Table of Contents
