Reset The Factory Settings; How To Upgrade The Tv Software - Philips 32PF9968 User Manual

TV menu
Installation
Factory settings
Language
Reset
Country
Channels
Preferences
Connections
Decoder
Factory settings
Software upgrade
Info
TV menu
Installation
Software upgrade
Current softw. info
Language
Local upgrades
Country
Announcement
Channels
Preferences
Connections
Decoder
Factory settings
Software upgrade
Info

Reset the Factory settings

This allows you to reset most of the predefined factory states.
1. Select and press the cursor right.
2. Press the
default values.

How to upgrade the TV software

This allows you to upgrade your TV software using a USB
device.
USB device upgrade
It is possible to initiate an upgrade procedure from a USB
device before you start up the TV.The memory device must
be filled with the appropriate upgrade image (and structure)
which can be found on the www. philips.com/software
website.
How to upload a new software version on your memory
device, see Annex 2, Philips TV software upgrade with
portable memory, p. 47.
Automatic software announcement
When you switch on your TV a message may appear that a
new software upgrade is available.
<
Press the red colour key on your remote control if you
want to be reminded later on.
<
Press the green colour key on your remote control to
confirm you have read the message.
> Once you have confirmed, the message will not pop up
again.
If however, you want to see the last broadcasted
announcement again, select Announcement in the
Software upgrade menu.
Note: as long as the software upgrade has not been
executed, the message will be available.
key to erase settings and reset them to their
OK
EN
(if present)
27