Philips 32PF9968 User Manual page 10

EN
PHILIPS Installation
This will help you to complete the Settings
assistant.
Television
Settings assistant
Previous Next
PHILIPS Settings assistant
Please select your location before
continuing:
Home
Shop
10 10
First time installation (Continued)
Step 3: Settings assistant: select your TV settings
By means of several split screens/full screens you are
prompted to select your preferred Picture and Sound
settings, to finally arrive at a complete setting which satisfies
you.
1. Press the green colour key on your remote control to enter
the Settings assistant menu.
2. Select your Location with the cursor up/down.
> If you choose Shop it will skip the Settings assistant.
Skip Stop
Press the green colour key again to proceed.
> If you choose Home it will display the Settings
3. Use the cursor left/right to each time select your preferred
screen.
4. Press the green colour key to each time confirm your
selection and to jump to the following screen.
> The following items will be presented sequentially.
The Settings assistant will step sequentially through the
following settings: Picture and Sound.
5. Press the green colour key again to store all the settings
and to return to the TV installation menu.
Note: when you skip or stop the Settings Assistant, then
the standard settings Philips selected for you will be
chosen.
6. Press the red colour key again to finish the First time
installation procedure and to display the first stored TV
channel.
Note: any time you can change or reset your settings or
adjust individual settings for Picture and Sound in the TV
settings menu. See p. 13, Use of the TV menu settings.
To control the settings of special TV functions, features and
accessory equipment, see p. 19, Adjust feature menu
settings.
The TV parameters for Picture and Sound will then be
set to predefined fixed settings.
assistant.
In the header it is mentioned how many screens have
been completed and how many screens there are in
total.