Page 1
From single to double (including twins), to carrying a third on a buggyboard, the NUVO Pram grows with your family across 18 configurations. You’re ready from day one. BETTER SINGLE TO TOGETHER DOUBLE PRAM NUVO ® Product Guide...
Page 3
Our products are designed in Australia for our unique lifestyle. They are as functional as they are beautiful, serving our core purpose to enrich your family journey. CELEBRATING HEAD-TURNING HOMEGROWN STYLE NUVO PRODUCT GUIDE...
Page 4
Maximum weight limits /18/ Supported configurations /19/ Single mode /20/ Double mode /22/ Triple mode with buggyboard /23/ Features and components /24/ Assembly instructions /28/ Frame /28/ Basket /29/ Brake component /29/ Front wheels /30/ Rear wheels /30/ Bassinet fabrics /31/ REDSBABY.COM.AU...
Page 5
Seat fabrics /37/ Canopy /42/ Bumper bar /43/ Frame adaptors /44/ Using your NUVO /46/ Unfolding /47/ Folding /48/ Lifting and carrying safely /51/ Engaging and releasing the brake /52/ Locking the front wheels /53/ Adjusting the handlebar /54/ Using the 5-point safety harness...
Page 6
Scan to Watch How-to and assembly videos available at redsbaby.com.au REDSBABY.COM.AU...
Page 7
There may be slight variations in the design of your product to the images shown in this product guide. Your NUVO frame is compatible with the NUVO seat and bassinet only. Do not use your NUVO frame with any other model of pram, seat or bassinet.
Page 8
Do not leave your NUVO in sunlight for prolonged periods, as fabrics may fade. • Store your NUVO in a dry, well-ventilated and safe place. • Do not use your NUVO if screws are loose or missing or if any component is damaged. REDSBABY.COM.AU...
Page 9
• Do not place any fabric or other component of your NUVO in the dryer. Allow all parts to dry thoroughly before storing. • Do not fold or store your product if it is damp or wet.
Page 10
Safety standards Redsbaby NUVO is designed to comply with AS 2088:2022 and CPN No.8 of 2007. REDSBABY.COM.AU...
Page 11
Incorrect assembly and use can result in serious injury or death. Always follow the safety instructions to ensure that your NUVO is correctly folded, assembled, and the locks are engaged for safe usage. After unpacking, immediately discard packaging materials, as these can become a choking hazard.
Page 12
• Do not leave children unattended. • Secure the child in the harness at all times. • Do not carry extra children or bags on the Redsbaby NUVO. • • Make sure children are clear of any moving parts if...
Page 13
• We recommend you do not use the Redsbaby NUVO on stairs, as this may damage the frame and lead to breakage. • Do not use or leave the Redsbaby NUVO near open fire or exposed flames. • Brakes must always be applied when the Redsbaby NUVO is not moving.
Page 14
• The Redsbaby NUVO Bassinet is only approved for use with the Redsbaby NUVO Pram. • The Redsbaby NUVO Seat is only approved for use with the Redsbaby NUVO Pram. • Maximum weight for a child in the bassinet is 9kg (19.8lbs).
Page 15
Redsbaby Buggyboard. • The Redsbaby NUVO can be used for three (3) children when used with the Redsbaby Buggyboard. • Do not hang bags on the Redsbaby NUVO handles, as this can cause it to become unstable. NUVO PRODUCT GUIDE...
Page 16
• Do not lift or carry the Redsbaby NUVO when a child is in it. • Do not lift or carry the Redsbaby NUVO when fully assembled. Only lift and carry when folded. • The Redsbaby NUVO is designed for use on flat or gentle sloping surfaces and may be unstable on higher sloping and uneven surfaces.
Page 17
• Do not allow child to stand while in the second seat. • Always push the pram/stroller with two hands. • Never leave a child in the Redsbaby NUVO when ascending or descending stairs or using on an escalator.
Page 18
BASKET MAXIMUM WEIGHT For items in the basket is 12kg (26.5 lbs). BUGGY BOARD MAXIMUM WEIGHT Maximum weight for a child on the buggyboard is 20kg (44.1 lbs). BABY CAPSULE Maximum weight for a child in the baby capsule is 13kg (28.6lbs). REDSBABY.COM.AU...
Page 20
Single mode IMPORTANT DO NOT use any configurations other than those shown in this product guide. Using non-approved configurations may cause a hazardous unstable condition and lead to injury. Bassinet Upper position Parent-facing Middle position Parent-facing REDSBABY.COM.AU...
Page 21
Parent-facing Parent-facing World-facing Capsule IMPORTANT DO NOT use the capsule in the upper position in single mode as it may cause the pram to become unstable. ONLY USE THE CAPSULE IN THE MIDDLE POSITION. Middle position Parent-facing NUVO PRODUCT GUIDE...
Page 22
Bassinet Lower position Bassinet Lower position Bassinet Lower position parent-facing parent-facing parent-facing Seat Seat Upper position Seat Upper position Seat Upper position parent-facing parent-facing world-facing Seat Lower position Seat Lower position Seat Lower position parent-facing world-facing world-facing REDSBABY.COM.AU...
Page 23
Note: Some capsules are not compatible in this configuration. Triple mode with buggyboard Seat Upper position Seat Upper position Seat Upper position world-facing parent-facing world-facing Seat Lower position Bassinet Lower position Bassinet Lower position world-facing parent-facing parent-facing NUVO PRODUCT GUIDE...
Page 24
FRONT WHEELS HOUSING FRAME FOLD LOCK CANOPY MESH WINDOW BUMPER BAR SEAT RECLINE LEVER SEAT FABRIC TETHER STRAP 5-POINT SAFETY HARNESS REAR WHEELS FOOT REST LEVER BRAKE NOTE: THE BASSINET AND SEAT SHARE THE SAME FRAME, BUMPER BAR AND CANOPY REDSBABY.COM.AU...
Page 26
UPPER POSITION UPPER/ MIDDLE FRAME ADAPTORS MIDDLE POSITION BASSINET/ SEAT FRAME LOWER POSITION UPPER MIDDLE LOWER REDSBABY.COM.AU...
Page 27
BUMPER BAR BASSINET APRON BASE FABRICS CANOPY NUVO PRODUCT GUIDE...
Page 28
2. Release the frame fold lock located on the left hand side of the frame. 3. Holding the handlebar, gently lift the frame until the frame locks into place. When the frame has been fully opened, you will hear and feel a firm click. REDSBABY.COM.AU...
Page 29
2. To assemble on the frame, use the clips and zipper provided. Brake component The brake is red in colour and is permanently assembled on your pram frame. It is located next to the right rear wheel of the frame. NUVO PRODUCT GUIDE...
Page 30
1. Press the centre button on each wheel and insert it in the frame’s rear wheel housing. Once inserted, release the centre button. 2. To remove the rear wheels press the button in the middle of the wheel and pull outwards. REDSBABY.COM.AU...
Page 31
Note: You can identify the foot end of the bassinet base fabric as it does not have a mesh panel. NUVO PRODUCT GUIDE...
Page 32
3. Repeat step 2 on the head end of the bassinet/ seat frame. REDSBABY.COM.AU...
Page 33
Slot each end of the support rod into the keyhole. Note: The rod ends are shaped like a key and can only slot into the holes in one direction. 5. Repeat with the second support rod on the opposite side. NUVO PRODUCT GUIDE...
Page 34
6. Pull the support rods backwards into place. Once assembled correctly, your bassinet will sit rigid and upright. REDSBABY.COM.AU...
Page 35
7. Position the bassinet mattress inside. 8. Zip the apron onto the foot end. 9. Attach the canopy and bumper bar. NUVO PRODUCT GUIDE...
Page 36
2. Pull the support rods out of the keyholes on the bassinet/ seat frame by rotating to align with the keyhole and pulling outwards. 3. Remove the base fabric by unzipping from the bassinet/ seat frame. REDSBABY.COM.AU...
Page 37
2. Take the bassinet/ seat frame and click it into the pram frame. Remove the bumper bar and canopy if attached. 3. Take the seat back fabric and pull over the top of the bassinet/ seat frame. NUVO PRODUCT GUIDE...
Page 38
4. Take the piping located on the sides of the seat fabric and feed through the channels on the sides of the bassinet/ seat frame. REDSBABY.COM.AU...
Page 39
FOOT REST FABRIC SIDE A SIDE B 5. Take SIDE A of the foot rest fabric and gently feed through the channel on the left side of the bassinet/ seat frame. Tip: Use the pull-tab gently to assist. NUVO PRODUCT GUIDE...
Page 40
6. Secure the press snaps on the bottom of the seat pad to the base of the seat fabric. 7. Press the seat pad into the base of the seat back fabric. REDSBABY.COM.AU...
Page 41
5. Gently pull the piping on the sides of the seat back fabric from the sides of the bassinet/ seat frame. 6. Pull the seat back fabric off the top of the bassinet/ seat frame. NUVO PRODUCT GUIDE...
Page 42
Ensure the elastic loop is secured over the hook on the canopy clips. 2. To remove the canopy, place hands on the canopy clips that secure the canopy to the bassinet/ seat frame and pull upwards. REDSBABY.COM.AU...
Page 43
Bumper bar 1. To secure, click into the bassinet/ seat frame. 2. To remove, press the buttons located under the left/ right side of the bumper and pull outwards. NUVO PRODUCT GUIDE...
Page 44
This is do not need to be removed to fold not an approved configuration and the pram. may lead to the pram tipping. UPPER/ MIDDLE FRAME ADAPTORS UPPER MIDDLE Single configurations 1. Open the frame and put the brake on. REDSBABY.COM.AU...
Page 45
2. Locate the upper and middle positions on the pram frame. Secure the upper/ middle frame adaptors into the upper or middle position. 3. Click the bassinet or seat into the upper/ middle frame adaptors. NUVO PRODUCT GUIDE...
Page 46
Using your NUVO REDSBABY.COM.AU REDSBABY.COM.AU...
Page 47
3. Holding the handlebar, gently lift the frame until the frame locks into place. When the frame has been fully opened, you will hear and feel a firm click. 4. A firm click indicates the frame is unfolded and locked in place. NUVO PRODUCT GUIDE...
Page 48
2. Locate the frame fold latches. 3. Simultaneously slide the frame fold latches upwards on each side of the frame. 4. Fold the frame toward the ground, until the frame fold lock engages. ALWAYS put the brake on before folding. REDSBABY.COM.AU...
Page 49
The NUVO cannot be folded with the bassinet(s) or capsule(s) attached. These must be removed before folding. Fold with seat attached You can fold the NUVO with the seat attached in parent-facing and world- facing positions. 1. Ensure the seat is in the upright position.
Page 50
6. Ensure the frame fold lock is engaged. The NUVO can also be folded in double mode with two seats parent-facing or two seats world-facing by following the same steps.
Page 51
Lifting and carrying safely • Always lift and carry the frame using two hands. • Ensure the frame fold lock is engaged. NUVO PRODUCT GUIDE...
Page 52
To engage Press downwards on the brake. A firm click indicates the brake is engaged. To release Press your foot forwards on the top surface of the brake or flick upwards from underneath the brake until it disengages. REDSBABY.COM.AU...
Page 53
Locking the front wheels To lock Locate the switches at the back of the front wheel housing and rotate. To unlock Rotate the switches back to their starting position. NUVO PRODUCT GUIDE...
Page 54
Adjusting the handlebar 1. Push button located on the inside of handlebar. 2. Adjust to the desired height. REDSBABY.COM.AU...
Page 55
To lock Insert the clips located on the shoulder and waist straps into the centre buckle. Click backwards to secure. To unlock Press the button in the middle of the buckle to release all straps at once. NUVO PRODUCT GUIDE...
Page 56
3. Adjust the crotch strap C1 to the desired fit by sliding the adjuster upwards or downwards. Note: Padding has been provided for the shoulder straps, waist straps and crotch strap. REDSBABY.COM.AU...
Page 57
Reclining the seat To recline Lift the seat recline lever upwards and move the seat into the desired position. NUVO PRODUCT GUIDE...
Page 58
Removing the bassinet/ seat 1. Remove the bassinet/ seat by pushing the connectors located on both sides of the bassinet/ seat frame and lifting the bassinet/ seat upwards. REDSBABY.COM.AU...
Page 59
2. Secure the bassinet/ seat into the upper/ middle frame adaptors in the upper or middle position. 3. Check the lock indicators. NUVO PRODUCT GUIDE...
Page 60
2. Turn the seat around into the desired direction. 3. Secure the seat by clicking it back into the upper/ middle frame adaptors. 4. Check the lock indicators. REDSBABY.COM.AU...
Page 61
Adjusting the foot rest The foot rest has three positions. 1. Pull the foot rest lever upwards. 2. Adjust the foot rest to the desired height. NUVO PRODUCT GUIDE...
Page 62
Using the tether strap Attach the tether strap to your wrist at all times when using the NUVO. REDSBABY.COM.AU...
Page 64
Register your product online at redsbaby.com.au within 60 days of delivery to receive an additional 12 month warranty. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
Page 65
CLAIM VALIDITY Immediately cease use of the product once you become aware of a fault or defect. Contact Redsbaby to report the issue. You must make a claim within the claims period for it to be valid. WARRANTY EXPENSES Redsbaby will provide repairs and replacements free of charge for claims made within the claims period.
Page 66
We strive to use resources and make decisions that safeguard our planet for future generations. Our products are made to last for years to come and wherever possible, use sustainable materials and packaging to minimise our impact on our beautiful planet. REDSBABY.COM.AU...
Page 67
'REDSBABY', 'NUVO', ‘BETTER TOGETHER’, 'FOR YOUR JOURNEY' and 'FOR FUTURE' are registered trademarks of Redsbaby Pty Ltd ACN 625 563 519 729 Elizabeth Street Zetland 2017 NSW Australia 1800 841 889 NUVO PRODUCT GUIDE...
Need help?
Do you have a question about the NUVO and is the answer not in the manual?
Questions and answers