Table of Contents
Advertisement
Press the FUNC. button to scroll through the operation functions
as follows:
[ ]: Model dependent. If the indoor unit does not have this
function, it will not display.
The selected function icon will flash, then press the Confirm
button to confirm the setting.
Turbo function
Active Clean
Follow me function indicator
Press the FUNCTION button to select whether the room temperature is detected
at the indoor unit or the wire controller.
When the follow me function
room temperature is detected by the wired controller.
Press the button again to cancel the follow me
function.
Rinnai
Under the COOL/HEAT mode, press the FUNCTION button to
activate the turbo function. Press the button again to deactivate
the turbo function. When the turbo function is activated the "
symbol appears.
This process assists with cleaning the indoor coil and depending
on the appliance it can take up to 90 minutes to complete.
symbol appears, the
26
DRCi R32 Wired Controller OIM
"
Advertisement
Table of Contents
