Table of Contents
Advertisement
Swing function
(1:1 & Multi – Hi-Wall)
• Use the "Swing" button to adjust the Up-Down airflow direction
and start the auto swing function.
1. Each time you press this button, the louver swings at an angle of 6 degrees.
Press this button until the desired direction is reached.
2. Press and hold the button for 2 seconds to activate the auto swing.
The "
" symbol appears. To stop, press button again (some units).
• For the units with four Up-Down louvers, it can be operated individually.
1. Press the Swing button to activate the Up-Down adjusting louver
function.
The "
2. Pressing the button "
louvers. Each time you push the button, the louver will be selected
in a sequence as:
(
3. Use Swing button to adjust the Up-Down airflow direction of the selected
louver.
Rinnai
" symbol will flash. (Not applicable on all the models.)
means the four louvers move at the same time.)
" or "
" can select the movement of four
25
DRCi R32 Wired Controller OIM
Advertisement
Table of Contents
