12/16/2018
HP Compaq dc7700 Business PC - Removal and Replacement Procedures -- Small Form Factor (SFF) Chassis | HP® Customer Support
Installing a Cable Lock
The cable lock may be used to secure the computer access panel to the chassis and, at the same time, secure the computer to a fixed object.
Insert the cable lock in the location shown below.
Installing a Padlock
A padlock may be used by itself to secure the access panel to the computer chassis. A padlock may also be used with a security cable to secure the
computer to a fixed object.
Computer Cover
1.
Prepare the computer for disassembly (
Before removing the computer cover, ensure that the computer is turned off and that the power cord is disconnected
CAUTION:
from the electrical outlet.
2.
Press the buttons on the left and right sides of the computer (1).
3.
Slide the computer cover towards the front of the computer until it stops (2), then lift it up and off the chassis.
To install the computer cover, reverse the removal procedure.
https://support.hp.com/us-en/product/hp-compaq-dc7700-small-form-factor-pc/3232029/document/c00862331#AbT11
Preparation for Disassembly
).
Need he
trouble
4/29