Adjusting The Front Shock Absorber Assemblies (Yxr70Fsepy) - Yamaha RHINO FUEL INJECTION 700 FI 2008 Owner's Manual

5UG1B001
Adjusting the front shock absorber
assemblies (YXR70FSEPY)
The spring preload, rebound damping and
compression damping forces of the front
shock absorber assemblies can be adjusted
to suit the operating conditions.
WARNING
These shock absorber assemblies contain
highly pressurized nitrogen gas. Read and
understand the following information be-
fore handling the shock absorber assem-
blies.
Do not tamper with or attempt to open
G
the cylinder assemblies.
Do not subject the shock absorber as-
G
semblies to an open flame or other
high heat source. This may cause the
unit to explode due to excessive gas
pressure.
G Do not deform or damage the cylin-
ders in any way. Cylinder damage will
result in poor damping performance.
Do not dispose of a damaged or worn
G
out shock absorber assembly your-
self. Take the shock absorber assem-
bly to a Yamaha dealer for any
service.
4-23