Yamaha RHINO FUEL INJECTION 700 FI 2008 Owner's Manual page 39

To set the clock
1. Set the display to the clock.
2. Push the " /
starts flashing.
3. Set the hours by pushing the "H" button.
4. Set the minutes by pushing the "M" but-
ton.
5. Push the " /
lease it to start the clock.
" button until the clock
" button, and then re-
Voltage display mode
This display shows the battery voltage.
"btry" appears for 1 second when the voltage
display mode is first selected, and then the
battery voltage is shown.
If the battery voltage is less than 10 volts, "LO"
is displayed and if the voltage is above 16
volts, "HI" is displayed.
4-8
km/h