Yamaha RHINO FUEL INJECTION 700 FI 2008 Owner's Manual page 38

To reset a tripmeter, select it by pushing the
"TRIP/ODO" button, and then hold the "TRIP/
ODO" button for at least three seconds. The
tripmeters can be used to estimate the dis-
tance that can be traveled with a full tank of fu-
el. This information will enable you to plan
future fuel stops.
To switch the display between "km/h" and
"mph", push and hold the "TRIP/ODO" button
while turning the key to "ON".
Clock, hour meter and voltage display
modes
1
1. Clock/Hour button "
2. "H" button
4. Clock/Hour meter/Voltage display
Pushing the "
play between the clock mode "CLOCK", the
hour meter mode "HOUR", and the voltage
display mode "btry" in the following order:
CLOCK → HOUR → btry → CLOCK
4-7
km/h
4
/ "
3. "M" button
/ " button switches the dis-
2
3