Jump-Starting - Yamaha RHINO FUEL INJECTION 700 FI 2008 Owner's Manual

5B410022

Jump-starting

Jump-starting the vehicle should be avoided.
The battery should be removed and charged
instead.
WARNING
To avoid battery explosion and/or serious
damage to the electrical system:
Do not connect the negative lead of
G
the jumper cable to the negative termi-
nal of the battery
G Do not touch the positive lead of the
jumper cable to the negative lead.
Do not reverse the polarity of the
G
jumper cables when connecting to the
batteries.
However, if the vehicle must be jump-started,
proceed as follows.
1. Turn the key to "OFF".
2. Open the hood. (See pages 8-7–8-8 for
hood opening and closing procedures.)
3. Remove the battery compartment cover.
(See pages 8-47–8-49 for battery com-
partment cover removal and installation
procedures.)
4. Remove the console. (See page 8-9 for
console removal and installation proce-
dures.)
5. Using a charged 12-volt battery, connect
the positive lead of the jumper cable to
the positive terminal of the battery in the
vehicle and the other end of the positive
lead to the positive terminal of the
charged battery.
8-50