Table of Contents
Advertisement
Recording with the TV Off
i'Fc)colalio lem @lalcam M' am egele| clan Anil ism atcexe) cellars]
Another
Turn off the power of the TV or color monitor.
There will be no interference with the recording.
1 Press TVVTR so that the VTR indicator goes off.
2 Select the channel you want to watch on the TV.
VTR Indicator | Picture on the TV Screen
Channel selected by the VCR or the
playback picture of the VCR
Unilit
Channel selected by the TV
Recording Multi-channel TV Sound (MTS) Broadcasts
To record a stereo broadcast:
SET UP MENU
When a stereo broadcast program is received, the STEREO
LANGUAGE @ENGLISH FRENCH
indicator appears in the display window of the VCR. The
Sito Aut SEk
see BER
stereo program is automatically recortied in stereo. If a
PAUTO STEREO
ON @OFF
stereo program's reception is poor, set AUTO STEREO to
pare mie on uoek
OFF in the SET UP MENU. (See page 27.) The sound is
MORMAL AUDIO eMAIN. SAP
heard in monaural but the noise is reduced.
To record SAP (Second Audio Program) broadcast:
SET UP MENU
Normaily, set NORMAL AUDIO to MAIN in the SET UP
LANGUAGE @ENGLISH FRENCH
MENU. The main sound is recorded on the normal track.
pio: Aitn SEL.
"a0k OE
To record the SAP sound on the normal audio track, set
AUTO STEREO
@ON OFF
NORMAL AUDIO to SAP in the SET UP MENU.
prep teaea errs abe
AUDIO MIX
ON @OFF
DNORMAL AUDIO
MAIN @SAP
To monitor the SAP sound during recording, press AUDIO
MONITOR to light the SAP indicator in the display window.
NOTES:
@ When not recording an SAP broadcast, select MAIN. If you select SAP, no sound is recorded on the normal audio track.
@ When the TV is connected only to the VHF/UHF OUT on the VCR, you cannot hear the program in stereo.
Basic Operations | 35
sweiGorg
AL Guipsozey
|
Advertisement
Table of Contents
