Quick-Timer Recording - Sony SLV-595SHF Operating Instructions Manual

This function is convenient for recording programs without
going through the entire timer setting procedure. Note,
however, that it provides only an epee setting for the
program you wish to record.
4
NOTE:
Before you begin, make sure the clock has been set,
then ensure that the timer recording function is turned
off by checking the TIMER REC (recording) indicator. If
the indicator is lit, press TIMER REC ON/OFF to tum it
off.
Quick-Timer Recording
ibe Sethe a oe se o n d , Vase ea ease! . coef
If you're currently recording, skip to step 7.
1 insert a cassette into your VCR.
2 Press INPUT SELECT to light the TUNER in the
display window.
3 Select the desired recording speed (SP or EP) by
pressing TAPE SPEED inside the front panel.
4 Press QUICK TIMER on the VCR.
If you insert a cassette without its safety tab, your VCR
will eject the cassette.
5 Select the channel you wish to record using the
CHANNEL +/- or channel number buttons. Press
ENTER while the channel display flashes.
6 Press QUICK TIMER again to start recording.
7 Select the recording duration by pressing QUICK
TIMER to change the duration indicator in the display
window. Each time you press QUICK TIMER, the
recording duration increases by 30 minutes.
Once recording has finished, your VCR will turn off
automatically.
0:00 —>0:30 —> 1 : 0 0 : + +--+ 8:00
[,_
To stop quick-timer recording:
To stop quick-timer recording while a program is being
recorded, press TIMER REC ON/OFF.
Advanced Operations | 53
Guypsose sows - YOIND / UONOUN XepUl |