Table of Contents
Advertisement
Playback
The Data Screen
To delete or call up the data screen on the TV screen, press
DATA SCREEN on the Remote Commander.
Portions not played back or recorded
j Beginning
of the
gana
:
ning of the tape
MG
End of the
.
esa
tape
« Tape operation mode
Linear time counter
ee ,
Tape speed
NOTES:
@ The remaining tape length displayed is approximate.
Therefore, use it only as an approximate reference.
@ When you insert a cassette with a short tape length
such as T-20, T-30 or a non-standard commercially
available cassette, this indicator may not function
correctly.
The data screen display cannot be displayed on the
screen during still mode, slow motion playback or
high-speed playback.
30 | Basic Operations
Take
lop qiate pm irc] elem Oxelar(ciaies)
Before recording or playback, press COUNTER RESET on
the VCR to reset the counter to zero. By noting the setting,
you can find that point later by referring to the counter. Use
the label on the cassette to list the programs and their
counter readings.
NOTES ON COUNTER READING:
@ After a cassette is ejected, the counter reading is
retained. When a cassette is reinserted the counter
retums to "OHOOMOOS".
|
@ The counter does not work properly on the portions
on which no recording has been made.
Advertisement
Table of Contents
