Brake Light Switches - Yamaha FZ-07 2016 Owner's Manual

braking performance, which may re-
sult in loss of control and an acci-
dent.
Periodic maintenance and adjustment

Brake light switches

For non-ABS models
1 2
(a) (b)
1. Rear brake light switch
2. Rear brake light switch adjusting nut
The brake light, which is activated by
the brake pedal and brake lever,
should come on just before braking
takes effect. If necessary, adjust the
rear brake light switch as follows, but
the front brake light switch should be
adjusted by a Yamaha dealer.
Turn the rear brake light switch adjust-
ing nut while holding the rear brake
light switch in place. To make the
brake light come on earlier, turn the ad-
7-21
justing nut in direction (a). To make the
EAU57070
brake light come on later, turn the ad-
justing nut in direction (b).
For ABS models
The brake light, which is activated by
the brake pedal and brake lever,
should come on just before braking
takes effect. If necessary, have a
Yamaha dealer adjust the brake light
switches.
7