Advertisement
LD with TOC/CD/CDV
PROGRAMMING
CHAPTERS/TRACKS TO BE PLAYED BACK
WITHIN A SPECIFIED TIME PERIOD — Compu Program/Auto Program Edit
f the total playing time of both sides of the tape is specified,
chapters/tracks are automatically programmed for both sides
of the tape.
Compu Program Edit
Auto Program Edit
The player selects the chapters/tracks so that their total
Chapters/tracks are selected within the designated time,
playing time becomes the specified playing time as near as
starting from the first track.
possible.
1 Press PGM EDIT on the front panel.
@ With LD discs, after playback is performed, press EDIT.
PGM EDIT
@ When PGM EDIT is pressed during playback, the player enters
oO
pause mode.
J]
2 Set the total playing time of both sides of the tape
in minutes with the digit buttons (0-9).
Pe oP Pe
Press two digit buttons rapidly. For
example,
to enter
46
minutes,
5
DiC E Seance
press the [4] button and
[6] button
es ee ee ae
sequentially
[Compu Program Edit |
Auto Program Edit
3 Press »/u.
3 Press PGM EDIT again.
PGM EDIT
Program playback starts.
Sd
4 Press >/It.
Program playback starts.
When playback of the first program is completed, the player enters pause
mode. To play another program, press /#.
When all programs have been played, the player enters stop mode.
To clear program contents:
NOTES:
Press CLEAR on the remote control unit.
e@
With discs contained 33 tracks or more, programming may not
be correctly performed.
To specify the first track to be programmed:
@
With Auto Program Edit function, the programmed total playing
Only the track to be played first can be specified.
time is not occasionally close to the specified time compared
1 Prass PGM EDIT.
with Compu Program Edit.
2 Select the desired track by pressing SKIP Met or PP.
@
With LD discs, chapter No. 0 will not be programmed.
3. Set the playing time with the digit buttons.
@
When
chapter No.
1 is programmed,
the programmed
total
playing time may slightly differ from the actual calculation. This
if the specified
time
is too
short
for any track to be
is not a malfunction.
programmed:
Programming cannot be performed.
34
<VRB1048>
Advertisement
