Reverb And Delay Group (Serial).18; Delay -> Reverb; Reverb -" Delay.18 - Yamaha FX500B Operation Manual

1
T VP FB L/R RUT
R + D
43
L-R 2-4
1 TVP R/D
MIX
LUL
' R + D 50
0 + 0'
L-DLY (Left Channel Delay Tima: 0.1 — 380.0 ms)
Sets the delay time of the left channel.
R-DLY (Right Channel Delay Time: 0.1 — 380.0 ms)
Sets the delay time of the right channel.
FB (Feedback: 0 —100 %)
Determines the amount of effect-sound feedback returned
to the input of the processor. Higher values produce a
greater number of repeats.
UR (L/R Channel Delay Level Balance: 0 —100 %)
Sets the left-to-right channel balance of the delay sound
level. Higher values produce higher-level delay sound from
the left channel, and smaller values produce a high-level
delay sound from the right channel.
RVT (Reverb Time: 0.3 — 99 s)
Set the amount of time it takes for the reverb sound to
delay by 60 dB.
R/P (Reverb/Delay Level Balance: 0 — 100 %)
Determines the balance between the level of the reverb
and delay sound. Higher values produce a greater
proportion of reverb sound, while smaller values produce a
greater proportion of delay sound.
MIX (Mixing Balance: 0 100 %)
Sets the balance between the direct and effect sound.
Higher values produce a greater proportion of effect sound
in relation to direct sound.
LVL (Output Level: -42 — +6 dB)
Determines the output level of the effect.
• Reverb and Delay Group (Serial)
• Delay -* Reverb
(D -+ R)
• Reverb -+ Delay (R ->
D)
The Delay -* Reverb program provides both delay and
reverb, with delay before reverb.
DELAY REVERB
►OUT
The Reverb -* Delay provides delay and reverb with
reverb before delay.
j
TVP
FB L/R
DMX
1
R + D 28 L = R 0
1
TVP RUT RMX LUL
1
R + D 2-£ 0
+ 0
L-DLY (Left Channel Delay Time: 0.1 — 380.0 ms)
Sets the delay time of the left channel.
R-DLY (Right Channel Delay Time: 0.1 — 380.0 ms)
Sets the delay time of the right channel.
FB (Feedback: 0 — 100 %)
Determines the amount of effect-sound feedback returned
to the input of the processor. Higher values produce a
greater number of repeats.
UR (UR Channel Delay Level Balance: 0 —100 %)
Sets the left-to-right channel balance of the delay sound
level. Higher values produce higher-level delay sound from
the left channel, and smaller values produce a higher-level
delay sound from the right channel.
DMX (Delay Mixing Balance: 0 —100 %)
Sets the balance between the direct and delay sound.
Higher values produce a greater proportion of delay sound
in relation to direct sound.
RVT (Reverb Time: 0.3 — 99 s)
Set the amount of time it takes for the reverb sound to
delay by 60 dB.
RMX (Reverb Mixing Balance: 0 —100 %)
Sets the balance between the direct and reverb sound.
Higher values produce a greater proportion of reverb
sound in relation to direct sound.
LVL (Output Level: -42 — +6 dB)
Determines the output level of the effect.