G D/R (Delay And Reverb) - Yamaha Silent Brass Personal Studio ST5 User Manual

• PIT 1 (Pitch Shifter 1):
Changes the pitch of the signal, which is then mixed
with the original signal for output.
In PIT 1, the original signal's volume will be louder.
Use the Value Dial to set the pitch shift (in 1/2 step
increments from -24 to +24.d [detune]).
• PIT 2 (Pitch Shifter 2):
Changes the pitch of the signal, which is then mixed
with the original signal for output.
In PIT 2, the original and pitch signals are of the same
volume.
Use the Value Dial to set the pitch shift (in 1/2 step
increments from -24 to +24.d [detune]).
• PIT 3 (Pitch Shifter 3):
Changes the pitch of the signal, which is then mixed
with the original signal for output.
In PIT 3, the pitch signal will be louder.
Use the Value Dial to set the pitch shift (in 1/2 step
increments from -24 to +24.d [detune]).
• PIT 4 (Pitch Shifter 4):
Changes the pitch of the signal, which is then mixed
with the original signal for output.
In PIT 4, the only the pitch signal is produced.
Use the Value Dial to set the pitch shift (in 1/2 step
increments from -24 to +24.d [detune]).

G D/R (Delay and Reverb)

Delay and reverb effects simulate the natural reverbera-
tion found in acoustic environments giving the impres-
sion that the instrument is being played in a concert hall,
room, etc.
Select from the nine types listed below.
You can select one of the nine following effect types from
this effect block.
• ROOM1
• ROOM2
Adds reverberation to the sound to give the impres-
sion of playing in a room. ROOM2 is a larger space
than ROOM1.
Use the Value Dial to adjust the amount of reverb added
to the sound.
• HALL1
• HALL2
Adds reverberation to the sound to give the impres-
sion of playing in a concert hall. HALL2 is a larger
space than HALL1.
Use the Value Dial to adjust the amount of reverb added
to the sound.
31