Hide thumbs Also See for AM2NF3-VSTA:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2007 ASRock INC. All rights reserved.
ASRock AM2NF3-VSTA Motherboard
Published January 2007
1 1 1 1 1

Advertisement

Table of Contents
loading

Summary of Contents for ASROCK AM2NF3-VSTA

  • Page 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
  • Page 2 2 x 240-pin DDRII DIMM Slots JR1 / JL1 Jumper (Dual Channel B: DDRII_3, DDRII_4; Orange) Front Panel Audio Header (AUDIO1) Secondary Serial ATA Connector (SATA2, Black) 22 Internal Audio Connector: CD1 (Black) Primary Serial ATA Connector (SATA1, Black) Flash Memory...
  • Page 3 PS/2 Mouse Port (Green) Front Speaker (Lime) If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below for connection details in accordance with the type of speaker you use. TABLE for Audio Output Connection...
  • Page 4: Package Contents

    This Quick Installation Guide contains introduction of the motherboard and step-by- step installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice.
  • Page 5: Specifications

    Specifications Specifications Specifications Specifications Specifications Platform - ATX Form Factor: 12.0-in x 8.0-in, 30.5 cm x 20.3 cm - Socket AM2 for AMD Athlon 64FX / 64X2 / 64 and Sempron Processors - Supports AMD’s Cool ‘n’ Quiet Technology (see CAUTION 1)
  • Page 6 - 4 pin 12V power connector - CD in header - Front panel audio connector - 2 x USB 2.0 headers (support 4 USB 2.0 ports; 2 of them are shared with USB23 ports on the I/O panel) (see CAUTION 10)
  • Page 7 ® Windows ® Vista / Vista 64-bit driver keeps on updating now. As long as we have the latest driver, we will update it to our website in the future. Please visit our website for Microsoft ® Windows ® Vista...
  • Page 8 Premium and Basic Logo Premium and Basic Logo Premium and Basic Logo Premium and Basic Logo Premium and Basic Logo For system integrators and users who purchase this motherboard and ® plan to submit Windows Vista Premium and Basic logo, please follow the below table for minimum hardware requirement.
  • Page 9: Pre-Installation Precautions

    Step 4. When the CPU is in place, press it firmly on the socket while you push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.
  • Page 10: Installation Of Memory Modules (Dimm)

    (the same brand, speed, size and chip-type) DDRII DIMM pair in the slots of the same color. In other words, you have to install identical DDRII DIMM pair in Dual Channel A (DDRII_1 and DDRII_2;...
  • Page 11: Installing A Dimm

    Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
  • Page 12: Installing An Expansion Card

    PCI Slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. AGP slot: The AGP slot is used to install a graphics card. The ASRock AGP slot has a special design of clasp that can securely fasten the inserted graphics card.
  • Page 13: Jumpers Setup

    Note: To select +5VSB, it requires 2 Amp and higher standby current provided by power supply. JR1 JL1 Jumper (see p.2, No. 20) Note: If the jumpers JL1 and JR1 are short, both the front panel and the rear panel audio connectors can work. Clear CMOS Jumper (CLRCMOS1) (see p.2, No.
  • Page 14: Onboard Headers And Connectors

    Floppy Connector (33-pin FLOPPY1) (see p.2 No. 18) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE Connector (Blue) Secondary IDE Connector (Black) (39-pin IDE1, see p.2 No. 10) (39-pin IDE2, see p.2 No.
  • Page 15 (9-pin USB2_3) ports by attaching the front panel (see p.2 No. 28) USB cable to USB2_3 header, the USB ports 23 on the I/O panel will not be able to function. Infrared Module Header This header supports an optional wireless transmitting (5-pin IR1) and receiving infrared module.
  • Page 16 Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.
  • Page 17 Game Port Header Connect a Game cable to this header if the Game port bracket (15-pin GAME1) is installed. (see p.2 No. 19) ASRock AM2NF3-VSTA Motherboard...
  • Page 18 Logo yet, we provide you with the following driver installation choices: 1. “All in 1 Logo Driver( W/O HotPlug & RAID)”: You may choose this item to install all-in-1 logo driver which does not support Hot Plug and RAID functions, but it has passed Microsoft ®...
  • Page 19: Installing Windows

    64-bit OS, since Windows Vista / Vista 64-bit driver keeps on updating now. As long as we have the latest driver, ® we will update it to our website in the future. Please visit our website for Microsoft ® Windows Vista / Vista 64-bit driver and related information.
  • Page 20 NVIDIA ® RAID driver. After reading the floppy disk, the driver will be presented. Select the driver to install according to the mode you choose and the OS you install. NOTE. If you install Windows ® 2000 / Windows ®...
  • Page 21: Bios Information

    Untied Overclocking function, please enter “Overclock Mode” option of BIOS setup to set the selection from [Auto] to [CPU, AGP, Async.]. Therefore, CPU FSB is untied during overclocking, but AGP / PCI buses are in the fixed mode so that FSB can operate under a more stable overclocking environment.
  • Page 22 ASRock AM2NF3-VSTA Motherboard...
  • Page 23 ™ ‘ ’ ™ ® ASRock AM2NF3-VSTA Motherboard...
  • Page 24 ® ® ASRock AM2NF3-VSTA Motherboard...
  • Page 25 ‘ ’ ™ ‘ ’ ™ ® ® ® ® ® ® ® ® ® ASRock AM2NF3-VSTA Motherboard...
  • Page 26 ® ® ASRock AM2NF3-VSTA Motherboard...
  • Page 27 ASRock AM2NF3-VSTA Motherboard...
  • Page 28 DDRII_1 DDRII_2 DDRII_3 DDRII_4 ASRock AM2NF3-VSTA Motherboard...
  • Page 29 ASRock AM2NF3-VSTA Motherboard...
  • Page 30 ASRock AM2NF3-VSTA Motherboard...
  • Page 31 ASRock AM2NF3-VSTA Motherboard...
  • Page 32 “ ” SATA2 SATA1 ASRock AM2NF3-VSTA Motherboard...
  • Page 33 ASRock AM2NF3-VSTA Motherboard...
  • Page 34 1 2 3 4 ® ASRock AM2NF3-VSTA Motherboard...
  • Page 35 ® ® ® ® ® ® ® ASRock AM2NF3-VSTA Motherboard...
  • Page 36 ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ASRock AM2NF3-VSTA Motherboard...
  • Page 37 ® ® ® ® ® ® ® ® ® ® ® ® ASRock AM2NF3-VSTA Motherboard...
  • Page 38 ® ® ASRock AM2NF3-VSTA Motherboard...
  • Page 39 ASRock AM2NF3-VSTA Motherboard...
  • Page 40 Wir danken Ihnen für den Kauf des ASRock AM2NF3-VSTA Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Page 41: Spezifikationen

    Spezifikationen Spezifikationen Spezifikationen Spezifikationen Plattform - ATX-Formfaktor: 30.5 cm x 20.3 cm; 12.0 Zoll x 8.0 Zoll - Sockel AM2, unterstützt AMD Athlon 64FX / 64X2 / 64 und Sempron Prozessoren - Unterstützt Cool ‘n’ Quiet™-Technologie von AMD (siehe VORSICHT 1) - Unterstützt Untied-Übertaktungstechnologie...
  • Page 42 Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems beschädigen.
  • Page 43 Motherboards! Permanente Beschädigung könnte die Folge sein! For microphone input, this motherboard supports both stereo and mono modes. For audio output, this motherboard supports 2-channel, 4-channel, 6- channel, and 8-channel modes. Please check the table on page 3 for proper connection. ASRock AM2NF3-VSTA Motherboard...
  • Page 44 ® ® 11. Der Microsoft Windows Vista / Vista 64-Bit Treiber wird ständig aktualisiert. Sobald wir den neuesten Treiber haben, stellen wir ihn auf unserer Website zur Verfügung. Bitte besuchen Sie unsere Website für ® ® den Microsoft Windows Vista...
  • Page 45 2.1 CPU Installation 2.1 CPU Installation Schritt 1: Öffnen Sie den CPU-Sockel, indem sie den Hebel leicht zur Seite und dann nach oben ziehen, auf einen Winkel von 90°. Schritt 2: Positionieren Sie die CPU genau so über dem Sockel, dass sich die Ecke der CPU mit dem goldenen Dreieck exakt über der Ecke des...
  • Page 46 Steckplätzen gleicher Farbe installieren. Mit anderen Worten, sie müssen ein identisches DDRII DIMM-Paar im Dual-Kanal A (DDRII_1 und DDRII_2; gelbe Steckplätze, siehe Seite 2 Nr. 5) oder ein identisches DDRII DIMM-Paar im Dual- Kanal B (DDRII_3 und DDRII_4; orange Steckplätze, siehe Seite 2 Nr. 6) installieren, damit die Dual-Kanal-Speichertechnologie aktiviert werden kann.
  • Page 47 Öffnen Sie einen DIMM-Slot, indem Sie die seitlichen Clips nach außen drücken. Schritt 2: Richten Sie das DIMM-Modul so über dem Slot aus, dass das Modul mit der Kerbe in den Slot passt. Die DIMM-Module passen nur richtig herum eingelegt in die Steckplätze.
  • Page 48 Gehäuseschacht (Slot) , den Sie nutzen möchten und behalten die Schraube für den Einbau der Karte. Schritt 3: Richten Sie die Karte über dem Slot aus und drücken Sie sie ohne Gewalt hinein, bis sie den Steckplatz korrekt ausfüllt. Schritt 4: Befestigen Sie die Karte mit der Schraube aus Schritt 2.
  • Page 49: Einstellung Der Jumper

    +5VSB (Standby) zu setzen (siehe S.2, Punkt 1) und die PS/2 oder USB- Weckfunktionen zu aktivieren. Hinweis: Um +5VSB nutzen zu können, muss das Netzteil auf dieser Leitung 2A oder mehr leisten können. JR1 JL1-Jumper (siehe S.2, Punkt 20) Hinweis: Wenn die JR1- und JL1- Jumper verbunden sind, können die Audioanschlüsse an dem Frontfeld sowie an der Rückwand arbeiten.
  • Page 50 Floppy-Laufwerk (33-Pin FLOPPY1) die rotgestreifte Seite auf Stift 1 (siehe S.2, Punkt 18) Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1- Seite des Anschlusses verbunden wird. Primärer IDE-Anschluss (blau) Sekundärer IDE-Anschluss (schwarz) (39-pin IDE1, siehe S.2, Punkt 10) (39-pin IDE2, siehe S.2, Punkt 11)
  • Page 51 Verbinden Sie das schwarze Stromversorgungskabel Ende des SATA-Netzkabels mit dem Netzanschluss am (Option) Verbindung zum Laufwerk. Verbinden Sie dann SATA-HDD-Stromanschluss das weiße Ende des SATA- Verbindung zum Netzteil Stromversorgungskabels mit dem Stromanschluss des Netzteils. USB 2.0-Header Zusätzlich zu den vier üblichen USB 2.0-Ports an den...
  • Page 52 Draht dem Erdungsstift an. 1 2 3 4 Obwohl dieses Motherboard einen vierpoligen CPU-Lüfteranschluss (Quiet Fan) bietet, können auch CPU-Lüfter mit dreipoligem Anschluss angeschlossen werden; auch ohne Geschwindigkeitsregulierung. Wenn Sie einen dreipoligen CPU-Lüfter an den CPU-Lüferanschluss dieses Motherboards anschließen möchten, verbinden Sie ihn bitte mit...
  • Page 53 Game-Anschlusshalter (siehe S.2, Punkt 19) installiert ist. Serial A Serial A Serial AT T T T T A A A A A - (SA - (SA - (SAT T T T T A) F - (SA A) F A) F...
  • Page 54 Hot-Plug- und Hot-Swap-F Hot-Plug- und Hot-Swap-Funktion für SA Hot-Plug- und Hot-Swap-F unktion für SA unktion für SA unktion für SAT T T T T A A A A A -F -F -F -F -Festplatten estplatten estplatten estplatten Hot-Plug- und Hot-Swap-F Hot-Plug- und Hot-Swap-F unktion für SA...
  • Page 55 ® Windows XP 64-Bit auf Ihren SATA-Festplatten mit RAID-Funktionen installieren möchten. Sie müssen über SP4 verfügen, ehe Sie Windows 2000 in Ihrem System installieren. Falls Ihre Windows ® -Version noch nicht über SP4 verfügen sollte, können Sie mit Hilfe der nachstehenden Internetseite einen SP4-Datenträger anlegen: http://www.microsoft.com/Windows2000/downloads/servicepacks/sp4/...
  • Page 56 ® SCHRITT 4: Installieren Sie Windows 2000 / Windows XP / Windows 64-Bit in Ihrem System. ® Nach den Schritten 1, 2 und 3 können Sie mit der Installation von Windows 2000 / Windows ® XP / Windows ® XP 64-Bit beginnen. Zu Beginn der Windows ®...
  • Page 57 Dieses Motherboard unterstützt die Entkoppelte Übertaktungstechnologie, durch die der FSB durch fixierte AGP / PCI- Busse beim Übertakten effektiver arbeiten. Bevor Sie die Entkoppelte Übertaktung aktivieren, stellen Sie bitte die Option “Overclock Mode” (Übertaktungsmodus) im BIOS von [Auto] auf [CPU, AGP, Async.] um.
  • Page 58: Contenu Du Paquet

    être trouvées dans le manuel l’utilisateur qui se trouve sur le CD d’assistance. Les spécifications de la carte mère et le BIOS ayant pu être mis à jour, le contenu de ce manuel est sujet à des changements sans notification.
  • Page 59: Spécifications

    Spécifications Format - Facteur de forme ATX: 12.0 pouces x 8.0 pouces, 30.5 cm x 20.3 cm - Socket AM2 prenant en charge le processeur AMD Athlon 64FX / 64X2 / 64 et Sempron - Supporte la technologie Cool ‘n’ Quiet™ d’AMD...
  • Page 60 - br. 4 connecteur d’alimentation 12V ATX - Connecteurs audio internes - Connecteur audio panneau avant - 2 x En-tête USB 2.0 (Prend en charge 4 ports USB 2.0 ; 2 sont partagés avec les ports USB23 du panneau E/S) (voir ATTENTION 10)
  • Page 61 Cool ‘n’ Quiet™ d’AMD. Cette carte mère prend en charge la technologie Untied Overclocking. Veuillez lire “La technologie de surcadençage à la volée” à la page 75 pour plus d’informations. Cette carte mère supporte la Technologie de Mémoire à Canal Double.
  • Page 62 Windows ® Vista / Vista 64-bits continue d’être mis à jour. Dès que nous aurons un nouveau pilote, nous mettrons à jour notre site Web à l’avenir. Veuillez visite notre site Web pour obtenir ® ® le pilote Microsoft Windows...
  • Page 63 Etape 1. Déverrouillez le support en relevant le levier selon un angle de 90 Etape 2. Placer l’UC directement au-dessus de la prise pour que le coin de l’UC avec son triangle jaune coïncide avec le petit triangle dans le coin de la prise.
  • Page 64 DIMM DDRII identiques (de la même marque, de la même vitesse, de la même taille et du même type de puce) dans les slots de même couleur. En d’autres termes, vous devez installer une paire de DIMM DDRII identiques dans le Canal Double A (DDRII_1 et DDRII_2;...
  • Page 65 Installation d’un module DIMM Installation d’un module DIMM Installation d’un module DIMM Ayez bien le soin de débrancher l’alimentation avant d’ajouter ou de retirer des modules DIMM ou les composants du système. Etape 1. Déverrouillez un connecteur DIMM en poussant les taquets de maintien vers l’extérieur.
  • Page 66: Installation D'une Carte D'extension

    (Slots PCI et Slot AGP) (Slots PCI et Slot AGP) Il y a 5 slots PCI et 1 slot AGP sur la carte mère AM2NF3-VSTA. Slots PCI: Les slots PCI sont utilisés pour installer des cartes d’extension dotées d’une interface PCI 32 bits.
  • Page 67 Note: Pour sélectionner +5VSB, il faut obligatoirement 2 Amp et un courant standby supérieur fourni par l’alimentation. Cavaliers JR1 JL1 (voir p.2 fig. 20) Note: Si les cavaliers JR1 et JL1 sont en court-circuit, les connecteurs audio des panneaux avant et arrière peuvent fonctionner. Effacer la CMOS Cavalier (CLRCMOS1) Paramètres...
  • Page 68 (FLOPPY1 br. 33) le côté avec fil rouge côté Broche1 (voir p.2 fig. 18) Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le côté Broche1 du connecteur. Connecteur IDE primaire (bleu) Connecteur IDE secondaire (noir) (IDE1 br.
  • Page 69 En-tête USB 2.0 A côté des quatre ports USB 2.0 par défaut sur le panneau (USB45 br.9) E/S, il y a deux embases USB (voir p.2 fig. 12) 2.0 sur cette carte mère. Chaque embase USB 2.0 peut prendre en charge 2 ports USB 2.0.
  • Page 70 (Ventilateur silencieux) ventilateur de CPU à 4 broches , le ventilateur de CPU à 3 broches peut bien fonctionner même sans la fonction de commande de vitesse du ventilateur. Si vous prévoyez de connecter le ventilateur de CPU à...
  • Page 71 SATA sur cette carte mère pour des appareils de stockage interne. Cette section vous guidera pour installer les disques durs SATA. ETAPE 1 : Installez les disques durs SATA dans les baies pour disques de votre châssis. ETAPE 2 : Connectez le câble d’alimentation SATA au disque dur SATA.
  • Page 72 Puis, les pilotes compatibles avec votre système peuvent être détectés automatiquement et sont listés sur la page du pilote du CD. Veuillez suivre l’ordre de haut en bas sur le côté pour installer les pilotes requis. En conséquence, les pilotes que vous installez peuvent fonctionner correctement.
  • Page 73 Avant d’installer Windows ® 2000 sur votre système, votre disque est supposé inclure SP4. S’il n’y a aucun SP4 inclut dans votre disque, veuillez visiter le site Web ci-dessous pour les procédures appropriées pour créer un disque SP4 : http://www.microsoft.com/Windows2000/downloads/servicepacks/sp4/ spdeploy.htm#the_integrated_installation_fmay...
  • Page 74 XP / Windows ® XP 64-bit. Au début de la configuration Windows ® appuyez sur F6 pour installer un lecteur RAID tiers. Lorsque vous y êtes invité, ® insérez une disquette contenant le lecteur NVIDIA RAID. Après lecture de la disquette, le lecteur est présenté.
  • Page 75 [Auto] à [CPU, AGP, Async.]. Par conséquent, le CPU FSB n’est pas lié durant le surcadençage, mais les bus AGP / PCI sont en mode fixé de sorte que FSB peut opérer sous un environnement de surcadençage plus stable.
  • Page 76 Grazie per aver scelto una scheda madre ASRock AM2NF3-VSTA, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza. Questa Guida Rapida all’Installazione contiene l’introduzione alla motherboard e la guida passo-passo all’installazione.
  • Page 77 Specifiche Specifiche Specifiche Specifiche Piattaforma - ATX Form Factor: 12.0-in x 8.0-in, 30.5 cm x 20.3 cm Processore - Presa AM2 che supporta processore AMD Athlon 64FX / 64X2 / 64 e Sempron - Supporto tecnologia AMD Cool ‘n’ Quiet™(vedi ATTENZIONE 1) - Supporta la tecnologia overclocking “slegata”...
  • Page 78 - 4-pin connettore ATX 12V - Connettori audio interni - Connettore audio sul pannello frontale - 2 x Collettore USB 2.0 (Supporto di 4 porte USB 2,0; 2 di queste sono condivise con le porte USB23 del pannello I/O) (vedi ATTENZIONE 10)
  • Page 79 Ciò potrebbe provocare danni permanenti! Questa scheda madre supporta l’ingresso stereo e mono per il microfono. Questa scheda madre supporta le modalità 2 canali, 4 canali, 6 canali e 8 canali per l’uscita audio. Controllare la tavola a pagina 3 per eseguire il collegamento appropriato.
  • Page 80 11. Il driver Microsoft Windows Vista / Vista 64-bit è in continuo aggiornamento. Fintanto che saremo in possesso del driver più recente, terremo aggiornata la versione sul nostro sito. Visitare il nostro sito per il ® ® driver Microsoft Windows Vista / Vista 64-bit e relative informazioni.
  • Page 81: Installazione

    2.1 Installazione del processore Step 1. Aprire lo zoccolo sollevando la leva da un angolo di 90°. Step 2. Posizionare la CPU direttamente sopra la presa in modo tale che l’angolo della CPU con il triangolo dorato corrisponda all’angolo della presa con il triangolino.
  • Page 82 2.2 Installazione dei moduli di memoria (DIMM) La scheda madre AM2NF3-VSTA fornisce quattro alloggiamenti DIMM DDRII (Double Data Rate) a 240 pin, e supporta la tecnologia Dual Channel Memory. Per la configurazione a due canali, è necessario installare sempre coppie identiche (stessa marca, velocità, dimensioni e tipo di chip) di DIMM DDRII negli alloggiamenti...
  • Page 83 Sbloccare lo slot DIMM premendo i fermi che lo trattengono verso l’esterno. Step 2. Allineare una DIMM sullo slot così che il pettine della DIMM combaci con la sua sede sullo slot. La DIMM può essere montata correttamente soltanto con un orientamento.
  • Page 84 Step 2. Rimuovere i ganci sullo slot che si intende utilizzare. Tenere a portata di mano le viti. Step 3. Allineare il connettore della scheda con lo slot e premere con decisione finché...
  • Page 85 Nota: Per selezionare +5VSB, si richiedono almeno 2 Ampere e il consumo di corrente in standby sarà maggiore. Jumper JR1 JL1 (vedi p.2 item 20) Nota: Se i jumper JR1 e JL1 sono in corto, possono funzionare i connettori audio del pannello frontale e del pannello posteriore. Resettare la CMOS Jumper (CLRCMOS1)
  • Page 86 Floppy disk (33-pin FLOPPY1) (vedi p.2 item 18) Lato del Pin1 con la striscia rossa Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1 del connettore. Connettore IDE primario (blu) Connettore IDE secondario (nero) (39-pin IDE1, vedi p.2 item 10)
  • Page 87 USB 2.0. Ciascuna intestazione USB 2.0 supporta due porte USB 2.0. Questo collettore USB2_3 è condiviso Collettore USB 2.0 con le porte USB 2.0 2 e 3 su condiviso pannello posteriore I/O. Quando si utilizzano le porte (9-pin USB2_3) USB del pannello frontale, (vedi p.2 item 28)
  • Page 88 Sebbene la presente scheda madre disponga di un supporto per ventola CPU a 4 piedini (ventola silenziosa), la ventola CPU a 3 piedini è in grado di funzionare anche senza la funzione di controllo della velocità della ventola. Se si intende collegare la ventola CPU a 3 piedini al connettore della ventola CPU su questa scheda madre, collegarla ai piedini 1-3.
  • Page 89 SATA come periferiche interne di archiviazione. Questa sezione vi guiderà nell’installazione dei dischi rigidi SATA. 1° PASSO: Installare gli Hard Disk SATA negli spazi per le unità disco del telaio. 2° PASSO: Collegare il cavo d’alimentazione SATA al disco rigido SATA.
  • Page 90 Quindi, i driver compatibili con il sistema vengono rilevati automaticamente ed elencati nella pagina del driver del CD in dotazione. Per l’installazione dei driver necessari, procedere in base ad un ordine dall’alto verso il basso. In tal modo, i driver installati funzioneranno correttamente.
  • Page 91 Prima di installare Windows ® 2000 nel sistema, il disco dovrebbe includere il SP4. Se non c’è il SP4 incluso nel disco, visitare il sito internet in basso per le procedure adeguate per la creazione di un disco SP4: http://www.microsoft.com/Windows2000/downloads/servicepacks/sp4/ spdeploy.htm#the_integrated_installation_fmay...
  • Page 92 (Inserire un dischetto vergine formattato nell’unità floppy A: premere un tasto qualsiasi per iniziare) Inserire un floppy nell’unità floppy e premere un tasto qualsiasi. Il sistema inizierà a formattare il floppy-disk e a copiare i driver SATA su questo. 2° PASSO: Configurare il BIOS.
  • Page 93 <F2> durante il Power-On-Self-Test (POST) della Setup utility del BIOS; altrimenti, POST continua con i suoi test di routine. Per entrare il BIOS Setup dopo il POST, riavvia il sistema premendo <Ctl> + <Alt> + <Delete>, o premi il tasto di reset sullo chassis del sistema.
  • Page 94 ASRock. Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte.
  • Page 95 Especificación Especificación Especificación Plataforma - Factor forma ATX: 30,5 cm x 20,3 cm, 12,0” x 8,0” Procesador - Socket de AM2 con soporte para procesador AMD Athlon 64FX / 64X2 / 64 y Sempron - Con soporte para tecnología Cool ‘n’ Quiet™ de AMD (ver ATENCIÓN 1)
  • Page 96 - 4-pin conector de ATX 12V power - Conector de Audio Interno - Conector de audio de panel frontal - 2 x Cabezal USB 2.0 (admite 4 puertos USB 2,0; 2 de ellos compartidos con puertos USB23 en el panel de E/S) (vea ATENCIÓN 10)
  • Page 97 ADVERTENCIA Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de aumento de la velocidad del reloj, incluido el ajuste del BIOS, aplicando la tecnología de aumento de velocidad liberada o utilizando las herramientas de aumento de velocidad de otros fabricantes.
  • Page 98 NO utilice una tarjeta AGP de 3,3V AGP en la ranura AGP de esta placa base. Podría causar daños permanentes. Para la entrada de micrófono, esta placa madre ofrece soporte para modos estéreo y mono. Para salida de audio, este placa madre ofrece soporte para modos de 2 canales, 4 canales, 6 canales y 8 canales.
  • Page 99: Instalación

    Paso 3. Coloque cuidosamente el CPU en el zócalo. El CPU se encaja al zócalo a una sola orientación. No esfuerce el CPU en el zócalo para prevenir encorvados de los pins del CPU. Si no puede encajar el CPU, examine su orientación o examine si los pins están ya...
  • Page 100: Instalación De Memoria

    DDRII DIMM de Doble Canal A (DDRII_1 y DDRII_2; Ranuras Amarillas; consulte la p. 2 N. 5) o pares idénticos DDRII DIMM en el Doble Canal B (DDRII_3 y DDRII_4; Ranuras Anaranjado; consulte p.2 N.6), de modo que pueda activarse la Tecnología de Memoria de Doble Canal.
  • Page 101 Asegúrese de desconectar la fuente de alimentación antes de añadir o retirar módulos DIMM o componentes del sistema. Paso 1. Empuje los clips blancos de retención por el extremo de cada lado de la ranura de memoria. Paso 2. Encaje la muesca del DIMM hacia la cumbrera de la ranura.
  • Page 102 Paso 2. Quite la tapa que corresponde a la ranura que desea utilizar. Paso 3. Encaje el conector de la tarjeta a la ranura. Empuje firmemente la tarjeta en la ranura. Paso 4. Asegure la tarjeta con tornillos.
  • Page 103 Atención: Para elegir +5VSB, se necesita corriente mas que 2 Amp proveida por la fuente de electricidad. Jumpers JR1 JL1 (vea p.2, No. 20) Atención: Si los jumpers JR1 y JL1 son cortos, los conectores de audio del panel frontal y los del panel posterior podrán funcionar. Limpiar CMOS Jumper (CLRCMOS1) (ver p.2, No.
  • Page 104 (vea p.2, No. 18) la banda roja debe quedar en el mismo lado que el contacto 1 Atención: Asegúrese que la banda roja del cable queda situado en el mismo lado que el contacto 1 de la conexión. IDE conector primario (azul) IDE conector secundario (negro) (39-pin IDE1, vea p.2, No.
  • Page 105 USB 2.0. Cabezar USB 2.0 Este cabezar USB2_3 compartido comparte los puertos USB 2.0 2 y 3 en el panel de E/S. Al (9-pin USB2_3) usar los puertos USB del panel (ver p.2, No. 28) frontal conectando el cable...
  • Page 106 Si pretende enchufar el ventilador de procesador de 3 contactos en el conector del ventilador de procesador de esta placa base, conéctelo al contacto 1-3. Contacto 1-3 conectado Instalación del ventilador de 3 contactos...
  • Page 107 PASO 2: Conecte el cable de alimentación SATA al disco duro SATA. PASO 3: Conecte un extremo del cable de datos SATA al conector SATA de la placa base. PASO 4: Conecte el otro extremo del cable de datos SATA al disco duro SATA.
  • Page 108 XP 64-bit y deseen instalar controladores en su sistema desde el CD de soporte, dado que el controlador SATA suministrado por el fabricante del conjunto de chips no ha pasado aún la prueba del Logotipo de Windows, ofrecemos las siguientes opciones de instalación: 1.
  • Page 109 PASO 1: Haga un Disquete de Controlador SATA. Inserte el CD de soporte de ASRock en la unidad óptica de la unidad para iniciar el sistema. (NO inserte ningún disquete en la unidad de disco en este momento) Durante la comprobación inicial (POST) del sistema, pulse la tecla <F11>...
  • Page 110 FSB disfruta un mayor margen debido a los buses fijos AGP / PCI. Antes de que active la función de Forzado de Reloj (Overclocking) no relacionado, por favor entre a la opción de “Modo de Forzado de Reloj”...
  • Page 111 64 bits El CD de instalación que acompaña la placa-base trae todos los drivers y programas utilitarios para instalar y configurar la placa-base. Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará el Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora.

This manual is also suitable for:

Am2nf3-vsta_1233Am2nf3-vsta-3177 -

Table of Contents