Polyend Tracker Manual page 83

7
FX Steps
7.30 Band Pass Cutoff
FX Type Tag Effect
B Band Pass Filter
FX Description
Adjust the instrument cutoff frequency of the band pass filter. The instrument
filter is found in the instrument parameters P2/2 but can be disabled and this
effect will still operate.
Value Ranges Pad Range
0-100% Pad 1 = 0%, Pad 13 = 25, Pad 25 = 51, Pad 37 = 76,
Pad 48 = 100%.
Example
The cutoff frequency can be triggered by each step applied. This allows
sweeps using only FX steps with multiple steps ramping the value or glitchy
sequenced filter effects.
1 F5 16
---- B 0 Note and Instrument triggered
5 --- -- ---- B 25
9 --- -- ---- B 50
13 --- -- ---- B 75 Band sweeps through the frequencies
--- -- ----
16 B100
1 2 3 4 5 6 7 8 9 10 11
Band Pass
Cutoff
Filter Sweep
0%
Frequency in %
< 20Hz
164
12 13 14 15 16
100%
> 20KHz
Polyend Tracker Manual
NOTES NOTES
Polyend Tracker Manual
7.31 High Pass Cutoff
FX Type Tag Effect
H High Pass Filter
FX Description
Adjust the instrument cutoff frequency of the high pass filter. The instrument
filter is found in the instrument parameters P2/2 but can be disabled and this
effect will still operate.
Value Ranges Pad Range
0-100% Pad 1 = 0%, Pad 13 = 25, Pad 25 = 51, Pad 37 = 76,
Pad 48 = 100%.
Example
The cutoff frequency can be triggered by each step applied. This allows
sweeps using only FX steps with multiple steps ramping the value or glitchy
sequenced filter effects. 0% plays the sound as normal, all frequencies
present, while 100% will almost cutoff all frequencies.
1 F5 16
---- ---- Note and Instrument triggered with no filtering
5 --- -- ---- H 25
9 --- -- ---- H 50
13 --- -- ---- H 75
--- -- ----
16 H100 Sample triggered at step 1 will be fully filtered
1 2 3 4 5 6 7 8 9 10 11
High Pass
Cutoff
Filter Sweep
0%
Frequency in %
< 20Hz
7
FX Steps
12 13 14 15 16
100%
> 20KHz
165