Table of Contents
Advertisement
www.calspas.com
www.calspas.com
Chill Spa Quick Start Guide
1. Remove Filter Skimmer.
Remove the Skimmer from the filter housing by gently pulling
upward, this must be reinstalled after the spa has been filled up
and primed.
2. Remove The Filter .
Once the skimmer is removed, the filter can be removed by
holding the filter by the tab, turning counter-clockwise. Once
the filter is removed, soak the filter in water for about 15 minutes
before reinstallation.
3. Filling the Chill Spa.
Preventing airpockets in the plumbing is essential, for this reason
insert the hose through the filter canister to prevent air pockets
from forming. failure to do so can cause damage to the
refrigeration system.
NOTE: Never fill your spa with soft water.
Soft water makes it impossible to maintain the proper water
chemistry and may cause the water to foam, which will ulti-
mately harm the finish of the spa and void your warranty.
You may fill your fill your spa with well water provided the
following conditions are met: Have a Total Dissolved Solids
(TDS) and metals test performed by a qualified person after the
fill-up process but before spa use.
34 7
6
Advertisement
Table of Contents
