Asko DFI664XXLSOF.U Operating Instructions Manual page 37

Table continued from last page
Problem
Grease deposits in the dishwash-
er.
The dishes are not dry enough.
Possible causes
Low temperature programs have
been selected for a prolonged
period.
Depending on the load, the pro-
gram's drying cycle may be in-
sufficient.
The dishwasher is not fully load-
ed.
Rinse aid needs topping up or
dosage is set too low.
The TAB setting is activated and
all-in-one detergent with insuffi-
cient drying effect is being used.
Troubleshooting
Action
Select a program with Intensive
mode (Heat Boost). The pro-
gram will use a higher tempera-
ture to dissolve grease on very
dirty dishes. Or run a self-clean-
ing program once or twice a
month. See Self-cleaning in the
chapter Using the dishwasher.
Activate the Extra Dry option.
Fully load the dishwasher.
Top up with rinse aid or increase
the rinse aid dosage level. See
the chapter Settings.
Switch all-in-one detergents or
deactivate the TAB setting and
top up with salt and separate
rinse aid. See Rinse aid in the
chapter Settings.
Open the door a little once the
program has finished.
37