Asko DFI664XXLSOF.U Operating Instructions Manual page 26

Settings
Table continued from last page
Settings
9. Water hardness
10. Interior light at pow-
er off
Exit
26
Options
0/1/2/3/4/5/6/7/8/9
Pre-selected at factory: 0
On/Off
Adjusting the water softener. Select a setting
depending on the hardness of the water
supply. It is important that this setting is
correct!
German wa- French wa-
ter hardness ter hardness
scale scale
0-5°dH 0-9°fH
6-8°dH 10-14°fH
9-11°dH 15-20°fH
12-14°dH 21-25°fH
15-19°dH 26-34°fH
22-24°dH 35-43°fH
25-29°dH 44-52°fH
30-39°dH 53-70°fH
40-49°dH 71-88°fH
50°dH 89°fH
Do not forget to put salt in the salt compart-
ment after you have set the water softener
to 1 - 9.
For a water supply with a hardness under
6°dH (9°fH), select 0. The water softener is
deactivated and no salt is needed.
Select whether the interior light is to be
switched on when the dishwasher is turned
off and the door is opened. (If the main
power switch is turned on, the interior light
is always switched on when the door is
opened.)
To exit the dishwasher's Settings menu, se-
lect Exit and confirm your selection with the
mode selector .
Recommend-
ed setting
0
1
2
3
4
5
6
7
8
9