4- Installing Gateway; Skype Voip Gateway Installation; 1Windows Xp - Pluscom Technologies Limited SPG-11 User Manual

Pluscom Skype/PSTN Gateway

4- Installing Gateway

4.1 Skype VoIP Gateway Installation

DO NOT CONNECT THE SKYPE VOIP GATEWAY TO YOUR
COMPUTER UNTIL INSTRUCTED TO DO SO BY THE SKYPE VOIP
GATEWAY INSTALLATION WIZARD
The following instructions will guide you through the process of installing the Skype VoIP
Gateway.
The installation procedure is to:
• Install Skype™
• Start the Skype VoIP Gateway SW installation (step 1 below)
• Plug in the Skype VoIP Gateway WHEN INSTRUCTED TO DO SO
• Verify the installation is OK
• Connect a telephone handset to the Skype VoIP Gateway
• Connect the Skype VoIP Gateway to the wall jack. Note that this is optional and only
required for the forwarding features.
• Use your Skype VoIP Gateway to make and receive Skype™ calls
The detailed instructions follow:
If Skype™ is not already installed on your computer, visit
instructions there to install Skype™. Verify that Skype™ is working before installing the Skype
VoIP Gateway.
We strongly recommend you to update the latest Skype due to the one could
provide better performance and resolve some problems than the older one.

4.1.1Windows XP

Step 1:
Please insert the CD into your CD-ROM drive.
The CD should auto-start, displaying the following window. If it does not start, click on Start –
Run and type in CD: \autorun.exe (where CD is the drive letter of your CD-ROM drive.) Click
"USB Driver ".
Copyright © 2006 Pluscom Technologies Limited
SPG-11 User Manual
http://www.skype.com and follow the
4