Pluscom Technologies Limited SPG-11 User Manual page 37

Pluscom Skype/PSTN Gateway
SPG-11 User Manual
If you are on a PBX, you may need to press a digit to get an outside line (i.e. 9). In this case you
would enter 9,,,16175551212. You may need to experiment with the number of commas to enter.
This is related to the time it takes the PBX to provide a dial tone after pressing the outside line
digit (i.e. 9).
The instructions above describe how to forward incoming VoIP calls to the PSTN. In order to
forward incoming PSTN calls to a VoIP call, such as through SkypeOut™ or to a Skype account,
the instructions above for the "Incoming PSTN Calls" fields. For the number to dial, enter a speed
dial number (e.g. 77) associated with the Skype User without the * key (as shown above).or enter
the SkypeOut™ number (e.g. 0016175551212).
As you can see in the screenshot above, when forwarding is enabled, the driver will disable the
computer's ability to go to standby mode. When the computer tries to go into a standby mode,
you will see the following popup:
34
Copyright © 2006 Pluscom Technologies Limited