Programming The Remote - Sony Trinitron KV-20V80 Operating Instructions Manual

the
MB Operating video equipment
Programming the remote
You can use the supplied remote control to
operate Sony or non-Sony video equipment.
1 Press CODE SET.
2 Press VIR/DVD (FUNCTION).
3 Use the 0-9 buttons to key in the
manufacturer's code number from the
following chart.
4 Press ENTER.
VCR manufacturer code numbers
Manufacturer Code
Sony 301, 302, 303
Aiwa 338, 344
Broksonic 319, 317
Canon 309, 308
Daewoo 341, 312, 309
Emerson 319, 320, 316, 317, 318,341
Fisher 330, 335
Funai 338
General Electric 329, 304, 309
Go Video 322
Goldstar 332
Hitachi 306, 304, 305,338
JVC 314, 336, 337, 345, 346, 347
Kenwood 314, 336, 332, 337
LX1 (Sears) 332, 305, 330, 335, 338
26
Magnavox 308, 309, 310
Mitsubishi/MGA 323, 324, 325, 326
NEC 314, 336, 337
Panasonic 308, 309, 306, 307
Philips 308, 309, 310
Pioneer 308
Quasar 308, 309, 306
RCA/PROSCAN 304, 305, 308, 309, 311,
312, 313, 310, 329
Realistic 309, 330, 328, 335, 324, 338
Sansui 314
Samsung 322, 313, 321
Sanyo 330, 335
Sharp 327, 328
Sylvania 308, 309, 338, 310
Symphonic 338
Technics 309, 308
Toshiba 312, 311
Wards 327, 328, 335, 331, 332
Zenith 331
Operating a VCR _ Buttons on the
remote control
To turn on or off
To select a channel
directly
To change
channels
Press VTR (POWER).
Press the 0 ~ 9 buttons.
Press CH +/-.
To record
To play
Press B and @
simultaneously.
Press >.
To stop Press Ml.
To fast forward Press PP.
To rewind the tage = Press <4.
To pause Press El.
To resume normal playback,
press again or press >.
To search the
picture forward or
backward
To change input
mode
Tips
Press ® or <4 during
playback.
To resume normal playback,
release the button.
Press TV/VTR.
¢ In some rare cases, you may not be able to operate
your non-Sony video equipment with the supplied
remote control. In this case, please use the
equipment's own remote control.
© The code numbers for Sony VCR's are assigned at the
factory as follows:
VHS VCR 301 (preset code
for the supplied
remote control)
8 mm VCR 302
Beta, ED Beta VCRs 303
© When you remove the batteries, the code number may
revert to the factory setting.