Cable Or Antenna Connections; Connecting Directly To Cable; Cable And Antenna; Of An Ancona! Oo - Sony Trinitron KV-20V80 Operating Instructions Manual

Cable or Antenna Connections
Connecting directly to cable or an
antenna
The connection you choose will depend on the
cable found in your home. Newer homes will
be equipped with standard coaxial cable
(see A); older homes will probably have
300-ohm twin lead cable (see B); still other
homes may contain both (see C).
A
75-ohm (Rear of TV)
VHF only coaxial cable | VHF/UHF
/ VHEIUHE J pe)
or
+ Cable
B :
VHE | 300-ohm twin {Rear of TV)
' onlY Jead cable VHF/UHF
« UHF only
or
+ VHFIUHF
Cc 75-ohm coaxial cable
+ VHE
(Rear of TV)
VHF/UHF
and
EAC-66 U/V mixer
- UHE =e] Me veunpied)
300-ohm twin lead cable
Cable and antenna
* KV-27S65, 27V65 only
If your cable provider does not feature local
channels, you may find this set up convenient.
Select Cable or ANT mode by pressing ANT
on the remote control. You will be able to
alternate between the two input sources.
(Rear of TV)
AUX
J) et)
TO CONVERTER
CATV cable
(No connection "TO
CONVERTER" in this case)
Antenna cable
oe
VHF/UHF
Note
¢ In order to receive channels with an
antenna, you will need to turn your CABLE
to OFF (see page 23) and perform the
AUTO PROGRAM function.