Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for OSCAL FLAT 1
Summary of Contents for OSCAL FLAT 1
- Page 1 EUT Name:Smart phone HVIN/Model:FLAT 1C,FLAT 1 QUICK START GUIDE FLAT 1...
- Page 2 English Front Camera Receiver Screen Microphone Speaker Headphone Jack Type-C Port...
- Page 3 Camera Flashlight SIM/TF Card Volume+ Volume- Power...
- Page 4 How to insert the card To make sure your smartphone be able to call, put the SIM card in the following order. Press the card pin into the side hole and then the card tray pops up and pull out it. Take out the card slot and place the Nano card or Nano card and TF card with the metal side facing down.
- Page 5 How to boot Non-removable battery Press the power button for 3-5 seconds to boot How to send SMS, MMS Open the SMS app Select New Information Enter a phone number or browse your contacts Select Edit Information and enter your text Send MMS - video When writing a text message...
- Page 6 Hereby, Shenzhen DOKE Electronic Co., Ltd declares that this radio equipment type is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://ww- w.oscal.hk/ce/...
- Page 7 Maintenance Thoroughly understand the maintenance of this mobile and extend the service life of the mobile phone as much as possible. Please follow the instructions in the manual to open the phone, disassemble the accessories, and do not try other methods.
- Page 8 Federal Communication Commission Interference This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Need help?
Do you have a question about the FLAT 1 and is the answer not in the manual?
Questions and answers
Need help setting up an OSCAL flat 1c
To set up an OSCAL FLAT 1 smartphone, follow these steps:
1. Insert SIM/TF Card:
- Use the card pin to press into the side hole of the phone.
- The card tray will pop out; pull it out completely.
- Place a Nano SIM card or both a Nano SIM card and a TF card in the tray with the metal sides facing down.
- Ensure the bevel angles align with the card slot.
- Insert the card tray back into the phone in the correct direction.
2. Turn On the Phone:
- Press and hold the power button for 3-5 seconds to power on the device.
3. Set Up SMS and MMS (if required):
- Open the SMS app.
- Select "New Information."
- Enter a phone number or select a contact from your list.
- Edit and send your message as needed.
The phone is now set up and ready for use.
This answer is automatically generated