Table of Contents
Advertisement
Setting down the machine
Before setting down the portable power pack, remove
the machine from the portable power pack.
1.
Disconnect the plug of the machine and the socket
of the portable power pack.
2.
Remove the cord of the machine from the cord
holder of the waist belt (for PDC1500 only).
3.
Remove the hook of the hanging band from the
ring of the shoulder harness with one hand while hold-
ing the machine with the other hand, and then set down
the machine.
4.
Unlock the buckle of the chest belt (for PDC1500
only), and unlock the buckle of the waist belt, and then
set down the portable power pack slowly.
1
1
Fig.20
► 1 . Buckle
You can also set down the machine as follows.
1.
Disconnect the plug of the machine and the socket
of the portable power pack.
2.
Unlock the buckle on the hanging band with one
hand while holding the machine with the other hand.
1
Fig.21
► 1 . Buckle
MAINTENANCE
CAUTION:
Always be sure that the machine is
switched off and the portable power pack is dis-
connected from the machine before attempting to
perform inspection or maintenance.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Cleaning the machine
Clean the machine by wiping off dust with a dry cloth or
one dipped in soapy water and wrung out.
Fig.22
13 ENGLISH
Advertisement
Table of Contents
