Advertisement
10-3
Servicing Hints
Replacement of CD Drive
See also exploded view of changer mechanism.
1. Demount printed circuit board: remove 5 screws.
3. Remove 2 screws {pos 107,108) and demount CD drive
2. Disconnect flextoil and JST connector of CD drive from
lockings (pos 405,106).
Printed circuit board. Shortcircuit the flexfoil with a
4. Turn gearwheel (pos 42) of disc change mechanism by
. paperclip to protect the laser against ESD.
finger to move CD drive support in upper position as
;
shown in picture below @).
5. Demount CD drive support (pos 95) ©).
6. Replace CD drive (pos 100). The wire tree of JST
connector has to be desoldered and resoldered on the
new CD drive again.
CD drive flex foil
Mounting of Carrousel
1. Turn gearwheel (pos 42) of disc change mechanism by finger until CD drive is in play position.
_ 2. Mount carrousel (pos 115) so that disc is positioned right on tumtable. Carrousel position number doesn't matter.
CS 53 186
Advertisement
