IMPORTANT SAFETY INFORMATION To reduce the risk of injury or property damage, please follow these safety precautions. WARNING • Voltage power from outlet must match specifications on appliance nameplate. • This appliance must be grounded. • Using an extension cord may cause overheating and increase the risk of fire.
Page 4
• Do not store or use flammable vapors or liquids near the unit. • Do not immerse any part of the unit in water. • Do not attempt to disassemble, repair, modify or replace any part of the ice maker without permission from Silonn or its af- filiates. WARNING...
PRODUCT INTRODUCTION 1. Large Viewing Window 6. Control Panel 2. Ice Full Sensor 7. Handle 3. Ice Shovel 8. Drain Plug 4. Maximum Water Fill Line 9. Ice Basket 5. Air Exhaust Fan 10. Ice Scoop...
CONTROL PANEL INTRODUCTION Key (with indicator) Function The indicator light turns red when the ADD WATER water reservoir needs water. The indicator light turns red when the ICE FULL ice basket is full. The indicator light turns green when small ice mode is selected. The indicator light turns green when large ice mode is selected.
USING YOUR ICE MAKER BEFORE FIRST USE Missing Parts? Stand Upright for 24Hrs Check for Accessories Contact Us. 24Hrs Customer Service Discard first 4 cycles Use in locations of ice 10°C ~ 32°C Perfect Ice Shape Note: If not used in a long period, discard first 4 cycles More Cycles = Perfect Shape...
Page 8
4. What Not To Do! No other liquids Do not use in Unstable base. (Drinking water only). high or low temps. lower than 41°F/5°C HOW TO USE YOUR ICE MAKER Open cover and Pour water, do not exceed Press the “ON/ remove basket.
CLEANING AND MAINTENANCE To keep your ice tasting fresh and the unit looking great, we recom- mend cleaning the unit once per week. MANUAL CLEANING Remove the Clean using a soft basket. cloth with warm water and vinegar, then rinse with clean water.
• When the unit is not to be used for a long duration, drain the water completely & dry the interior. • Store in a well ventilated area. PRODUCT SPECIFICATIONS SLIM09B/SLIM09W/ SLIM09T Model SLIM09G1 Voltage/Frequency...
TROUBLESHOOTING Problem Possible Causes Solution Leave a 6-inch clearance Poor heat dissipation. on all sides of the ice mak- er for ventilation. The water temperature Fill with water temperature is too high. between 8°C and 25°C. Poor ice shape or quality.
Page 12
Problem Possible Causes Solution Ice is blocking the Empty the ice basket. infrared sensor. “ICE FULL” 1. Wipe clean the infrared light is on. sensors. Infrared sensors do not 2. Contact customer ser- work. vice if the infrared sen- sors still don’t work. Stop making ice, after the Making ice takes too ice melts restart and try...
Page 13
Problem Possible Causes Solution Stop making ice, refill Low water level or not water, press “ON/OFF”, enough water. then restart and try again. “ADD Water screen blocked at WATER” Start the self cleaning the bottom of the water light is on. function.
30-DAY TO 1-YEAR LIMITED WARRANTY After the 30-day warranty has expired, Silonn automatically activates a 1-year warranty from the date of purchase that covers product replacement. Please note that proof of purchase is required for all warranty claims.
Page 16
Thank You for Choosing Silonn! All of us at Silonn do appreciate your ice maker purchase. We hope that you are as happy with the ice maker as we were designing and manufacturing it for you. We strive to provide you with the best quality ice makers and services in the industry.
Need help?
Do you have a question about the SLIM09B and is the answer not in the manual?
Questions and answers
I never got my handle for it
If you did not receive the handle for your Silonn SLIM09B, you should contact the seller or manufacturer to request the missing part.
This answer is automatically generated