Top View - Yaesu FT-902DM Instruction Manual

AM/CW FILTER INSTALLATION
Remove the top cover. Locate and remove PB-
1995 (FILTER UNIT), Referring to Fig, 1, locate
jumpers A and B on the printed board. If the AM
filter is to be installed, the jumper marked A
must be removed, and for CW filter installation
the jumper marked B must be removed.
Referring to Figs. | and 2, install the desired
filter in the appropriate holes. Make the fastening
nuts snug (CW filter only), and solder the pins of
the filter to the printed board.
Re-install PB-199%5 in the chassis socket, and re-
place the cover of the transceiver,
CW FILTER
©
"AM FILTER
Figure 1
BSIO04QNG xB
TOP VIEW