Supporting The Motorcycle - Yamaha TT-R50E 2020 Owner's Manual

Periodic maintenance and adjustment
1
1. Battery coupler
5. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
Specified fuse:
10.0 A
6. Connect the battery coupler.
7. Install the battery cover by install-
ing the bolts.
8. Install the seat.
9. Turn the main switch to the on po-
sition.
10. Start the engine.
11. If the fuse immediately blows
again, check for a loose connec-
tion and repair. If none found,
have your Yamaha dealer check
the vehicle.
[EWA15132]
7-29

Supporting the motorcycle

1. Maintenance stand (for off-road motorcycle)
Since this model is not equipped with a
centerstand, use a maintenance stand
when removing the front or rear wheel,
adjusting the chain or washing the ve-
hicle, etc.
Check that the motorcycle is in a stable
and level position before starting any
maintenance.
TIP
If a suitable maintenance stand is not
available, a strong wooden box can be
used instead.
EAU75190
1
7