Adjusting The Carburetor - Yamaha TT-R50E 2020 Owner's Manual

Periodic maintenance and adjustment
1
1. Spark arrester
3. Insert the tailpipe into the muffler,
and then install and tighten the
bolts to the specified torque.
Tightening torque:
Tailpipe bolt:
10 N·m (1.0 kgf·m, 7.4 lb·ft)
TIP
Make sure to align the bolt holes when
inserting the tailpipe.

Adjusting the carburetor

The carburetor is an important part of
the engine and requires very sophisti-
cated adjustment. Therefore, most
carburetor adjustments should be left
to a Yamaha dealer, who has the nec-
essary professional knowledge and ex-
perience. The adjustment described in
the following section, however, may be
serviced by the owner as part of rou-
tine maintenance.
NOTICE
The carburetor has been set and ex-
tensively tested at the Yamaha fac-
tory. Changing
without sufficient technical knowl-
edge may result in poor perfor-
mance of or damage to the engine.
7-11
EAU39931
ECA10551
these settings
7