Specifications - Telecom Behnke 20-0001BS Series Instructions Manual

Instructions SIP intercoms series 20-0001BS, 20-0014BS, 20-0016BS
GB

Specifications

spEcIfIcatIons
5.
General
Operating mode:
Configuration:
Network
Connection:
Energy supply:
IP address assignment:
VLAN support:
USB expansion port:
IP camera integration:
UDP communication:
Port authentication:
92
Language: German, French or English
SIP telephone, IP intercom station
with a web browser via HTTP or HTTPS via a telephone with DTMF dialling,
the keypad or the display, if available
Access protected via password or security code
Ethernet 100BaseT according to IEEE 802.3, RJ45 or terminals, or
WiFi according to 802.11 b/g/n with WPA2 (only with antenna module)
WiFi only suitable for configuration purposes, must be started in network
configuration mode.
WiFi range depending on mounting situation
PoE according to IEEE 802.3af or
static, dynamic or link-local
Support for tagged VLANs
own VLAN connection for webcam possible
Time: Synchronisation via NTP, version 4 with public time server (requires Internet access)
or with local time server, if available
Email: Sending e-mails via SMTP or SMTPS
when a call button or the alarm input is triggered or when a sabotage is detected
in case of motion detection by the camera (if available) for logging the access control
Services: Service detection and publication via mDNS
available with USB expansion port adapter 1 Ethernet port with PoE, RJ45
Operation as absorption or extension port max. available PoE power: 3 W
automatic integration of a Behnke IP camera connected to the USB expansion port
manual integration of an IP camera (retrieval of the MJPG stream)
Status and remote control messages via UDP compatible with Behnke IP video
software
according to IEEE 802.1x with EAP
EAP-MD5, EAP-TLS, EAP-TTLS (PAP, CHAP, MSCHAP, MSCHAPv2, GTC, MD5) or PEAP
(MSCHAPv2, GTC, MD5)
www.behnke-online.de