Table of Contents
Advertisement
@ Screwing the Faceplate on the Unit
If you want to fasten the faceplate to the main unit so that it
does not fall off, insert the provided screws (@2.6 x 12mm) in
the holes as follows.
1 Insert one of the provided
—Holed)
screws into hole @ so that
the screw is perpendicular to
the bottom panel of the unit.
Accessory
Hole@)
Bottom panel
2 Similarly, insert another
provided screw into hole @.
Ensure that the faceplate is fixed firmly before operating this
unit.
ACAUTION
Never insert the taptite screws (92.6 x 12 mm) in any other
screw holes than the one specified. !f you insert it in another
hole, it will contract and may cause damage to the mechanical
parts inside the unit.
— 37 —
Advertisement
Table of Contents
