Advertisement
Available languages
Available languages
TROUBLESHOOTING
In case of malfunction, check for the following probable reasons. Make the necessary
corrections which may be performed at home. If the problem persists, consult the Electrolux
Authorized Service Centre.
PROBLEM
POSSIBLE CAUSES
CORRECTIONS
The vacuum cleaner
does not start.
The plug is not properly
connected to the socket.
Check the plug connection
or try another socket.
Thermal protector
activated due to motor
high temperature.
Press the ON/OFF button
and wait 30 minutes for the
motor to cool off.
Filter indicator lights
and stays on.
Dust container is full.
The filters are clogged.
Empty the dust container.
Clean or replace filters.
Reduction of
suction capacity.
Suction hose blocked.
Nozzle blocked.
Clean the hose.
Clean the nozzle.
Dust container is full.
Empty the dust container.
Filters clogged.
Clean or replace filters.
Damaged or broken hose.
Change the hose.
Over heating.
Dust container is full.
Empty the dust container.
Filters are clogged.
Clean/replace filters.
Technical Data
For Z1850 &Z1860
Rated Voltage: 220 - 240V, 50/60Hz
Max Power (W): 1600W
7
Advertisement
