Controls and ports 1. Power Button 6. Light Button 2. Bluetooth Button 7. Ex-Bass Button 3. Previous Track 8. LCD Screen 4. Play/Pause/Call Button 9. Volume Knob 5. Next Track 1. Type-C Charging Port (for charging the speaker) 2. 3.5mm AUX-IN Jack 3.
Page 4
CHARGI N G Insert one end of the included charging cable into the charging port on your speaker. Insert the other end into the USB port of a computer or a suitable USB charging adapter. to show the battery percentage on the LCD screen.
Getting Started Charge speaker before starting it up. To POWER ON press until the power indicator turns white. To POWER OFF press until all indicators turn off. To PLAY MUSIC tap To PAUSE MUSIC tap again. To CHANGE TRACK press to go to the next track to go to the previous track.
Once the speaker is turned on, it will enter pairing mode. To pair with device, turn on Bluetooth and find the speaker listed as Aiwa BB-X50 under the Bluetooth menu in settings. Then press connect. The Bluetooth indicator will light solid blue after successfully pairing with device.
Page 7
Connect multiple speakers To use multi-sync mode turn off all speakers and remove all devices from Bluetooth connection. Turn on the first speaker (Primary Speaker) and pair with Bluetooth device. Press to enter multi-sync mode. The Bluetooth indicator on will turn indicating multi-sync mode.
Other Features The hands-free call function is available when the speaker is paired with a smartphone. To ANSWER/END CALL press to answer. Press again to end call. To REJECT CALL press and hold Call is transmitted to Primary Speaker during multi-sync mode. To ADJUST LIGHT press to toggle between 5 light modes or to turn lights on/off.
SAFETYPRECAUTI O NS When using your speaker, basic safety precautions should always be followed including: 1. READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKER. 2. Do not submerge speaker in water. 3. Only clean using a clean, soft cloth. 4. Do not allow children to play with this product. This product contains small pieces that can be a choking hazard.
FCCSTATEMENT Changes or modifications not expressly approved by the part yresponsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
To Obtain Warranty Service and Troubleshooting Information: Call (877) 397-8200 or visit our website at www.aiwa.co. To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures.