Parameter Configuration; Authentication - 5th Wheel G1 pro User Manual

14 Parameter Configuration
Parameter
Product name
Model
L×W×H
Size
After folding L ×W ×H
Net weight
Weight
Maximum load
Status
capacity
Maximum hourly
speed
Full-battery
endurance
Maximum slope
Scope of
application
Main parameters Tyre
Brake system
LED display
Lighting system
Motor power
Adapter
Charging parameters
Rated input voltage
Lithium battery
Charging time
28
5TH WHEEL Scooter G1 pro
5LCHG11C
1190mm×575mm×1150 mm
1190mm×575mm×535 mm
20kg
100kg
25 km/h
35-40km (depending on the environment, angle, speed,
driving habits and other factors)
15%
Smooth road surface, with protrusions of less than 2 cm and
depressions of less than 3 cm
10-inch pneumatic tyre
disc brake
Speed, kilometers, gear
LED high-brightness headlight
500W
100V-240VAC 50/60Hz
36V-10AH
6-7h
EN
Wireless
Wireless parameters
frequency range
Wireless maximum
output power

15 Authentication

The EU Compliance Statement is as follows:
WEEE needs to properly dispose of and recycle the product. This sign indicates that the product should not be disposed of
together with other domestic waste throughout the EU.
Therefore, in order to prevent possible harm of uncontrolled waste treatment to the natural environment or human health,
it is necessary to recycle it and promote the sustainable reuse of material resources. To recycle the used product, use the
return and collection system or contact the retailer who can use the product for environmentally safe recycling.
EU Battery Recycling Information:
Batteries or battery compartments are marked in accordance with the European Directive 2006/66/EC and the amendment
2013/56/EU on batteries and accumulator cells and scrap batteries and accumulator cells.
The directive applies to the recycling framework of waste batteries and accumulator cells throughout the EU. The label on
the battery indicates that the battery should not be discarded, but recycled at the end of its service life according to the
directive.
According to the European Directive 2006/66/EC and the amendment 2013/56/EU, batteries and accumulator cells are
labeled to indicate that they will be collected separately and recycled at the end of their service life. The label on the battery
may also contain the chemical symbols of the relevant metals in the battery (Pb, Hg and Cd). Users should not dispose of
batteries and accumulator cells as garbage, but use the collection framework available to customers to recycle and dispose
of batteries and accumulator cells. With the engagement of users, it is important to minimize any potential impact of
batteries and accumulator cells on the environment and human health due to the presence of potentially hazardous
substances.
Before placing electrical and electronic equipment (EEE) into a waste collection stream or waste collection facility, users of
equipment containing batteries and/or accumulator cells must remove these batteries and accumulator cells for separate
collection.
Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive
The products and parts (cables, wires, etc.) of Invanti (Beijing) Technology Co., Ltd comply with the requirements of
directive 2011/65/EU on restricting the use of certain hazardous substances in electrical and electronic equipment ("RoHS
recasting" or "RoHS 2")
2402~2480 MHz
+7dBm
EN
29