Indication Description - 5th Wheel G1 pro User Manual

8 Indication Description

LED Headlight Status Indication
Switch On
If the LED headlight is switched on, the indicator remains on.
3 Gears Indication
Gear 1
The Gear 1 is enabled.
20
Switch Off
If the LED headlight is switched off, the indicator is off.
Gear2 Gear 3
The Gear 2 is enabled. The Gear 3 is enabled.
EN
Brief Use Instructions
When the scooter is powered off, press the Power switch briefly to turn it on.
When the scooter is operating, long press the Power switch to turn it off.
During riding the scooter, press the LED headlight switch briefly to turn on the LED headlight and press again to turn it
off. (The LED headlight switches circularly from ON to OFF to ON.)
During riding the scooter, double press the Power switch to switch gears, with the setting range being switched from
Gear 1, Gear 2 to Gear 3. The scooter will save the gear selected by the last time before shutdown.
If there is anything abnormal about the scooter, the warning indicator will flash, with the flashing value
E1-E6 displayed.
Errors Codes
Please check whether the taillight is on. If it is off, it means that the power supply is insufficient.
Communication
Please replace the controller or the LED display. If it is on, please check whether the connecting
E1
Fault
wire between the controller and the LED display is open-circuit.
Please check whether the
Brake Failure
E2
brake is pressed.
Throttle Please check whether the
E3
Failure throttle is pressed.
Check whether the motor
and controller wire is
Motor Fault E4
connected correctly.
Controller
E5 If the controller is damaged, please replace the controller.
Failure
Overheated Check whether the motor
E6
Motor temperature is too high.
Solutions
Press and release the brake to reset the brake.
If not, please check whether If it is open-circuit or short-circuited,
the connecting wire between please replace the connecting wire.
the brake and the LED display
Replace the brake handle.
is short-circuited or open-circuit.
Press and release the throttle to reset the throttle.
If not, please check whether the If it is open-circuit or short-
circuited, replace the connecting
connecting wire between the
wire.
throttle and the LED display is
short-circuited or open-circuit. Replace the throttle.
If it is not connected correctly, please adjust and connect the
motor and the controller correctly.
If it is connected correctly, please disconnect the connecting wire
and measure whether the internal resistance between the
three-phase wires of the motor is within a reasonable range,
generally within 0.1Ω-1Ω. If it exceeds the range, the motor needs
to be replaced.
If the motor temperature is too high, please wait for the motor
to cool to the appropriate working temperature.
If the motor temperature is normal, check whether the
connecting wire of the controller is short-circuited. If it is
short-circuited, please replace the connecting wire.
EN
21